- *get-all-by-name
- *get-by-address
- *get-by-name
- *get-local-host
- *get-loopback-address
- any-local-address?
- equals
- get-address
- get-canonical-host-name
- get-host-address
- get-host-name
- hash-code
- link-local-address?
- loopback-address?
- mc-global?
- mc-link-local?
- mc-node-local?
- mc-org-local?
- mc-site-local?
- multicast-address?
- reachable?
- site-local-address?
- to-string
jdk.net.InetAddress
This class represents an Internet Protocol (IP) address.
An IP address is either a 32-bit or 128-bit unsigned number used by IP, a lower-level protocol on which protocols like UDP and TCP are built. The IP address architecture is defined by RFC 790: Assigned Numbers, RFC 1918: Address Allocation for Private Internets, RFC 2365: Administratively Scoped IP Multicast, and RFC 2373: IP Version 6 Addressing Architecture. An instance of an InetAddress consists of an IP address and possibly its corresponding host name (depending on whether it is constructed with a host name or whether it has already done reverse host name resolution).
Address types
unicast An identifier for a single interface. A packet sent to a unicast address is delivered to the interface identified by that address.
The Unspecified Address -- Also called anylocal or wildcard
address. It must never be assigned to any node. It indicates the
absence of an address. One example of its use is as the target of
bind, which allows a server to accept a client connection on any
interface, in case the server host has multiple interfaces.
The unspecified address must not be used as
the destination address of an IP packet.
The Loopback Addresses -- This is the address
assigned to the loopback interface. Anything sent to this
IP address loops around and becomes IP input on the local
host. This address is often used when testing a
client.
multicast An identifier for a set of interfaces (typically belonging to different nodes). A packet sent to a multicast address is delivered to all interfaces identified by that address.
IP address scope
Link-local addresses are designed to be used for addressing on a single link for purposes such as auto-address configuration, neighbor discovery, or when no routers are present.
Site-local addresses are designed to be used for addressing inside of a site without the need for a global prefix.
Global addresses are unique across the internet.
Textual representation of IP addresses
The textual representation of an IP address is address family specific.
For IPv4 address format, please refer to Inet4Address#format; For IPv6 address format, please refer to Inet6Address#format.
There is a couple of System Properties affecting how IPv4 and IPv6 addresses are used.
Host Name Resolution
Host name-to-IP address resolution is accomplished through the use of a combination of local machine configuration information and network naming services such as the Domain Name System (DNS) and Network Information Service(NIS). The particular naming services(s) being used is by default the local machine configured one. For any host name, its corresponding IP address is returned.
Reverse name resolution means that for any IP address, the host associated with the IP address is returned.
The InetAddress class provides methods to resolve host names to their IP addresses and vice versa.
InetAddress Caching
The InetAddress class has a cache to store successful as well as unsuccessful host name resolutions.
By default, when a security manager is installed, in order to protect against DNS spoofing attacks, the result of positive host name resolutions are cached forever. When a security manager is not installed, the default behavior is to cache entries for a finite (implementation dependent) period of time. The result of unsuccessful host name resolution is cached for a very short period of time (10 seconds) to improve performance.
If the default behavior is not desired, then a Java security property can be set to a different Time-to-live (TTL) value for positive caching. Likewise, a system admin can configure a different negative caching TTL value when needed.
Two Java security properties control the TTL values used for positive and negative host name resolution caching:
networkaddress.cache.ttl Indicates the caching policy for successful name lookups from the name service. The value is specified as as integer to indicate the number of seconds to cache the successful lookup. The default setting is to cache for an implementation specific period of time.
A value of -1 indicates cache forever.
networkaddress.cache.negative.ttl (default: 10) Indicates the caching policy for un-successful name lookups from the name service. The value is specified as as integer to indicate the number of seconds to cache the failure for un-successful lookups.
A value of 0 indicates never cache.
A value of -1 indicates cache forever.
This class represents an Internet Protocol (IP) address.
An IP address is either a 32-bit or 128-bit unsigned number
used by IP, a lower-level protocol on which protocols like UDP and
TCP are built. The IP address architecture is defined by RFC 790:
Assigned Numbers, RFC 1918:
Address Allocation for Private Internets, RFC 2365:
Administratively Scoped IP Multicast, and RFC 2373: IP
Version 6 Addressing Architecture. An instance of an
InetAddress consists of an IP address and possibly its
corresponding host name (depending on whether it is constructed
with a host name or whether it has already done reverse host name
resolution).
Address types
unicast
An identifier for a single interface. A packet sent to
a unicast address is delivered to the interface identified by
that address.
The Unspecified Address -- Also called anylocal or wildcard
address. It must never be assigned to any node. It indicates the
absence of an address. One example of its use is as the target of
bind, which allows a server to accept a client connection on any
interface, in case the server host has multiple interfaces.
The unspecified address must not be used as
the destination address of an IP packet.
The Loopback Addresses -- This is the address
assigned to the loopback interface. Anything sent to this
IP address loops around and becomes IP input on the local
host. This address is often used when testing a
client.
multicast
An identifier for a set of interfaces (typically belonging
to different nodes). A packet sent to a multicast address is
delivered to all interfaces identified by that address.
IP address scope
Link-local addresses are designed to be used for addressing
on a single link for purposes such as auto-address configuration,
neighbor discovery, or when no routers are present.
Site-local addresses are designed to be used for addressing
inside of a site without the need for a global prefix.
Global addresses are unique across the internet.
Textual representation of IP addresses
The textual representation of an IP address is address family specific.
For IPv4 address format, please refer to Inet4Address#format; For IPv6
address format, please refer to Inet6Address#format.
There is a couple of
System Properties affecting how IPv4 and IPv6 addresses are used.
Host Name Resolution
Host name-to-IP address resolution is accomplished through
the use of a combination of local machine configuration information
and network naming services such as the Domain Name System (DNS)
and Network Information Service(NIS). The particular naming
services(s) being used is by default the local machine configured
one. For any host name, its corresponding IP address is returned.
Reverse name resolution means that for any IP address,
the host associated with the IP address is returned.
The InetAddress class provides methods to resolve host names to
their IP addresses and vice versa.
InetAddress Caching
The InetAddress class has a cache to store successful as well as
unsuccessful host name resolutions.
By default, when a security manager is installed, in order to
protect against DNS spoofing attacks,
the result of positive host name resolutions are
cached forever. When a security manager is not installed, the default
behavior is to cache entries for a finite (implementation dependent)
period of time. The result of unsuccessful host
name resolution is cached for a very short period of time (10
seconds) to improve performance.
If the default behavior is not desired, then a Java security property
can be set to a different Time-to-live (TTL) value for positive
caching. Likewise, a system admin can configure a different
negative caching TTL value when needed.
Two Java security properties control the TTL values used for
positive and negative host name resolution caching:
networkaddress.cache.ttl
Indicates the caching policy for successful name lookups from
the name service. The value is specified as as integer to indicate
the number of seconds to cache the successful lookup. The default
setting is to cache for an implementation specific period of time.
A value of -1 indicates `cache forever`.
networkaddress.cache.negative.ttl (default: 10)
Indicates the caching policy for un-successful name lookups
from the name service. The value is specified as as integer to
indicate the number of seconds to cache the failure for
un-successful lookups.
A value of 0 indicates `never cache`.
A value of -1 indicates `cache forever`.*get-all-by-nameclj
(*get-all-by-name host)Given the name of a host, returns an array of its IP addresses, based on the configured name service on the system.
The host name can either be a machine name, such as
java.sun.com, or a textual representation of its IP
address. If a literal IP address is supplied, only the
validity of the address format is checked.
For host specified in literal IPv6 address, either the form defined in RFC 2732 or the literal IPv6 address format defined in RFC 2373 is accepted. A literal IPv6 address may also be qualified by appending a scoped zone identifier or scope_id. The syntax and usage of scope_ids is described here. If the host is null then an InetAddress representing an address of the loopback interface is returned. See RFC 3330 section 2 and RFC 2373 section 2.5.3.
If there is a security manager and host is not null and host.length() is not equal to zero, the security manager's checkConnect method is called with the hostname and -1 as its arguments to see if the operation is allowed.
host - the name of the host, or null. - java.lang.String
returns: an array of all the IP addresses for a given host name. - java.net.InetAddress[]
throws: java.net.UnknownHostException - if no IP address for the host could be found, or if a scope_id was specified for a global IPv6 address.
Given the name of a host, returns an array of its IP addresses, based on the configured name service on the system. The host name can either be a machine name, such as `java.sun.com`, or a textual representation of its IP address. If a literal IP address is supplied, only the validity of the address format is checked. For host specified in literal IPv6 address, either the form defined in RFC 2732 or the literal IPv6 address format defined in RFC 2373 is accepted. A literal IPv6 address may also be qualified by appending a scoped zone identifier or scope_id. The syntax and usage of scope_ids is described here. If the host is null then an InetAddress representing an address of the loopback interface is returned. See RFC 3330 section 2 and RFC 2373 section 2.5.3. If there is a security manager and host is not null and host.length() is not equal to zero, the security manager's checkConnect method is called with the hostname and -1 as its arguments to see if the operation is allowed. host - the name of the host, or null. - `java.lang.String` returns: an array of all the IP addresses for a given host name. - `java.net.InetAddress[]` throws: java.net.UnknownHostException - if no IP address for the host could be found, or if a scope_id was specified for a global IPv6 address.
*get-by-addressclj
(*get-by-address addr)(*get-by-address host addr)Creates an InetAddress based on the provided host name and IP address. No name service is checked for the validity of the address.
The host name can either be a machine name, such as
java.sun.com, or a textual representation of its IP
address.
No validity checking is done on the host name either.
If addr specifies an IPv4 address an instance of Inet4Address will be returned; otherwise, an instance of Inet6Address will be returned.
IPv4 address byte array must be 4 bytes long and IPv6 byte array must be 16 bytes long
host - the specified host - java.lang.String
addr - the raw IP address in network byte order - byte[]
returns: an InetAddress object created from the raw IP address. - java.net.InetAddress
throws: java.net.UnknownHostException - if IP address is of illegal length
Creates an InetAddress based on the provided host name and IP address. No name service is checked for the validity of the address. The host name can either be a machine name, such as `java.sun.com`, or a textual representation of its IP address. No validity checking is done on the host name either. If addr specifies an IPv4 address an instance of Inet4Address will be returned; otherwise, an instance of Inet6Address will be returned. IPv4 address byte array must be 4 bytes long and IPv6 byte array must be 16 bytes long host - the specified host - `java.lang.String` addr - the raw IP address in network byte order - `byte[]` returns: an InetAddress object created from the raw IP address. - `java.net.InetAddress` throws: java.net.UnknownHostException - if IP address is of illegal length
*get-by-nameclj
(*get-by-name host)Determines the IP address of a host, given the host's name.
The host name can either be a machine name, such as
java.sun.com, or a textual representation of its
IP address. If a literal IP address is supplied, only the
validity of the address format is checked.
For host specified in literal IPv6 address, either the form defined in RFC 2732 or the literal IPv6 address format defined in RFC 2373 is accepted. IPv6 scoped addresses are also supported. See here for a description of IPv6 scoped addresses.
If the host is null then an InetAddress representing an address of the loopback interface is returned. See RFC 3330 section 2 and RFC 2373 section 2.5.3.
host - the specified host, or null. - java.lang.String
returns: an IP address for the given host name. - java.net.InetAddress
throws: java.net.UnknownHostException - if no IP address for the host could be found, or if a scope_id was specified for a global IPv6 address.
Determines the IP address of a host, given the host's name. The host name can either be a machine name, such as `java.sun.com`, or a textual representation of its IP address. If a literal IP address is supplied, only the validity of the address format is checked. For host specified in literal IPv6 address, either the form defined in RFC 2732 or the literal IPv6 address format defined in RFC 2373 is accepted. IPv6 scoped addresses are also supported. See here for a description of IPv6 scoped addresses. If the host is null then an InetAddress representing an address of the loopback interface is returned. See RFC 3330 section 2 and RFC 2373 section 2.5.3. host - the specified host, or null. - `java.lang.String` returns: an IP address for the given host name. - `java.net.InetAddress` throws: java.net.UnknownHostException - if no IP address for the host could be found, or if a scope_id was specified for a global IPv6 address.
*get-local-hostclj
(*get-local-host)Returns the address of the local host. This is achieved by retrieving the name of the host from the system, then resolving that name into an InetAddress.
Note: The resolved address may be cached for a short period of time.
If there is a security manager, its checkConnect method is called with the local host name and -1 as its arguments to see if the operation is allowed. If the operation is not allowed, an InetAddress representing the loopback address is returned.
returns: the address of the local host. - java.net.InetAddress
throws: java.net.UnknownHostException - if the local host name could not be resolved into an address.
Returns the address of the local host. This is achieved by retrieving the name of the host from the system, then resolving that name into an InetAddress. Note: The resolved address may be cached for a short period of time. If there is a security manager, its checkConnect method is called with the local host name and -1 as its arguments to see if the operation is allowed. If the operation is not allowed, an InetAddress representing the loopback address is returned. returns: the address of the local host. - `java.net.InetAddress` throws: java.net.UnknownHostException - if the local host name could not be resolved into an address.
*get-loopback-addressclj
(*get-loopback-address)Returns the loopback address.
The InetAddress returned will represent the IPv4 loopback address, 127.0.0.1, or the IPv6 loopback address, ::1. The IPv4 loopback address returned is only one of many in the form 127...*
returns: the InetAddress loopback instance. - java.net.InetAddress
Returns the loopback address. The InetAddress returned will represent the IPv4 loopback address, 127.0.0.1, or the IPv6 loopback address, ::1. The IPv4 loopback address returned is only one of many in the form 127.*.*.* returns: the InetAddress loopback instance. - `java.net.InetAddress`
any-local-address?clj
(any-local-address? this)Utility routine to check if the InetAddress in a wildcard address.
returns: a boolean indicating if the Inetaddress is
a wildcard address. - boolean
Utility routine to check if the InetAddress in a wildcard address.
returns: a boolean indicating if the Inetaddress is
a wildcard address. - `boolean`equalsclj
(equals this obj)Compares this object against the specified object. The result is true if and only if the argument is not null and it represents the same IP address as this object.
Two instances of InetAddress represent the same IP address if the length of the byte arrays returned by getAddress is the same for both, and each of the array components is the same for the byte arrays.
obj - the object to compare against. - java.lang.Object
returns: true if the objects are the same;
false otherwise. - boolean
Compares this object against the specified object.
The result is true if and only if the argument is
not null and it represents the same IP address as
this object.
Two instances of InetAddress represent the same IP
address if the length of the byte arrays returned by
getAddress is the same for both, and each of the
array components is the same for the byte arrays.
obj - the object to compare against. - `java.lang.Object`
returns: true if the objects are the same;
false otherwise. - `boolean`get-addressclj
(get-address this)Returns the raw IP address of this InetAddress object. The result is in network byte order: the highest order byte of the address is in getAddress()[0].
returns: the raw IP address of this object. - byte[]
Returns the raw IP address of this InetAddress object. The result is in network byte order: the highest order byte of the address is in getAddress()[0]. returns: the raw IP address of this object. - `byte[]`
get-canonical-host-nameclj
(get-canonical-host-name this)Gets the fully qualified domain name for this IP address. Best effort method, meaning we may not be able to return the FQDN depending on the underlying system configuration.
If there is a security manager, this method first calls its checkConnect method with the hostname and -1 as its arguments to see if the calling code is allowed to know the hostname for this IP address, i.e., to connect to the host. If the operation is not allowed, it will return the textual representation of the IP address.
returns: the fully qualified domain name for this IP address,
or if the operation is not allowed by the security check,
the textual representation of the IP address. - java.lang.String
Gets the fully qualified domain name for this IP address.
Best effort method, meaning we may not be able to return
the FQDN depending on the underlying system configuration.
If there is a security manager, this method first
calls its checkConnect method
with the hostname and -1
as its arguments to see if the calling code is allowed to know
the hostname for this IP address, i.e., to connect to the host.
If the operation is not allowed, it will return
the textual representation of the IP address.
returns: the fully qualified domain name for this IP address,
or if the operation is not allowed by the security check,
the textual representation of the IP address. - `java.lang.String`get-host-addressclj
(get-host-address this)Returns the IP address string in textual presentation.
returns: the raw IP address in a string format. - java.lang.String
Returns the IP address string in textual presentation. returns: the raw IP address in a string format. - `java.lang.String`
get-host-nameclj
(get-host-name this)Gets the host name for this IP address.
If this InetAddress was created with a host name, this host name will be remembered and returned; otherwise, a reverse name lookup will be performed and the result will be returned based on the system configured name lookup service. If a lookup of the name service is required, call getCanonicalHostName.
If there is a security manager, its checkConnect method is first called with the hostname and -1 as its arguments to see if the operation is allowed. If the operation is not allowed, it will return the textual representation of the IP address.
returns: the host name for this IP address, or if the operation
is not allowed by the security check, the textual
representation of the IP address. - java.lang.String
Gets the host name for this IP address.
If this InetAddress was created with a host name,
this host name will be remembered and returned;
otherwise, a reverse name lookup will be performed
and the result will be returned based on the system
configured name lookup service. If a lookup of the name service
is required, call
getCanonicalHostName.
If there is a security manager, its
checkConnect method is first called
with the hostname and -1
as its arguments to see if the operation is allowed.
If the operation is not allowed, it will return
the textual representation of the IP address.
returns: the host name for this IP address, or if the operation
is not allowed by the security check, the textual
representation of the IP address. - `java.lang.String`hash-codeclj
(hash-code this)Returns a hashcode for this IP address.
returns: a hash code value for this IP address. - int
Returns a hashcode for this IP address. returns: a hash code value for this IP address. - `int`
link-local-address?clj
(link-local-address? this)Utility routine to check if the InetAddress is an link local address.
returns: a boolean indicating if the InetAddress is
a link local address; or false if address is not a link local unicast address. - boolean
Utility routine to check if the InetAddress is an link local address. returns: a boolean indicating if the InetAddress is a link local address; or false if address is not a link local unicast address. - `boolean`
loopback-address?clj
(loopback-address? this)Utility routine to check if the InetAddress is a loopback address.
returns: a boolean indicating if the InetAddress is
a loopback address; or false otherwise. - boolean
Utility routine to check if the InetAddress is a loopback address. returns: a boolean indicating if the InetAddress is a loopback address; or false otherwise. - `boolean`
mc-global?clj
(mc-global? this)Utility routine to check if the multicast address has global scope.
returns: a boolean indicating if the address has
is a multicast address of global scope, false if it is not
of global scope or it is not a multicast address - boolean
Utility routine to check if the multicast address has global scope.
returns: a boolean indicating if the address has
is a multicast address of global scope, false if it is not
of global scope or it is not a multicast address - `boolean`mc-link-local?clj
(mc-link-local? this)Utility routine to check if the multicast address has link scope.
returns: a boolean indicating if the address has
is a multicast address of link-local scope, false if it is not
of link-local scope or it is not a multicast address - boolean
Utility routine to check if the multicast address has link scope.
returns: a boolean indicating if the address has
is a multicast address of link-local scope, false if it is not
of link-local scope or it is not a multicast address - `boolean`mc-node-local?clj
(mc-node-local? this)Utility routine to check if the multicast address has node scope.
returns: a boolean indicating if the address has
is a multicast address of node-local scope, false if it is not
of node-local scope or it is not a multicast address - boolean
Utility routine to check if the multicast address has node scope.
returns: a boolean indicating if the address has
is a multicast address of node-local scope, false if it is not
of node-local scope or it is not a multicast address - `boolean`mc-org-local?clj
(mc-org-local? this)Utility routine to check if the multicast address has organization scope.
returns: a boolean indicating if the address has
is a multicast address of organization-local scope,
false if it is not of organization-local scope
or it is not a multicast address - boolean
Utility routine to check if the multicast address has organization scope.
returns: a boolean indicating if the address has
is a multicast address of organization-local scope,
false if it is not of organization-local scope
or it is not a multicast address - `boolean`mc-site-local?clj
(mc-site-local? this)Utility routine to check if the multicast address has site scope.
returns: a boolean indicating if the address has
is a multicast address of site-local scope, false if it is not
of site-local scope or it is not a multicast address - boolean
Utility routine to check if the multicast address has site scope.
returns: a boolean indicating if the address has
is a multicast address of site-local scope, false if it is not
of site-local scope or it is not a multicast address - `boolean`multicast-address?clj
(multicast-address? this)Utility routine to check if the InetAddress is an IP multicast address.
returns: a boolean indicating if the InetAddress is
an IP multicast address - boolean
Utility routine to check if the InetAddress is an IP multicast address. returns: a boolean indicating if the InetAddress is an IP multicast address - `boolean`
reachable?clj
(reachable? this timeout)(reachable? this netif ttl timeout)Test whether that address is reachable. Best effort is made by the implementation to try to reach the host, but firewalls and server configuration may block requests resulting in a unreachable status while some specific ports may be accessible. A typical implementation will use ICMP ECHO REQUESTs if the privilege can be obtained, otherwise it will try to establish a TCP connection on port 7 (Echo) of the destination host.
The network interface and ttl parameters let the caller specify which network interface the test will go through and the maximum number of hops the packets should go through. A negative value for the ttl will result in an IllegalArgumentException being thrown.
The timeout value, in milliseconds, indicates the maximum amount of time the try should take. If the operation times out before getting an answer, the host is deemed unreachable. A negative value will result in an IllegalArgumentException being thrown.
netif - the NetworkInterface through which the test will be done, or null for any interface - java.net.NetworkInterface
ttl - the maximum numbers of hops to try or 0 for the default - int
timeout - the time, in milliseconds, before the call aborts - int
returns: a booleanindicating if the address is reachable. - boolean
throws: java.lang.IllegalArgumentException - if either timeout or ttl are negative.
Test whether that address is reachable. Best effort is made by the implementation to try to reach the host, but firewalls and server configuration may block requests resulting in a unreachable status while some specific ports may be accessible. A typical implementation will use ICMP ECHO REQUESTs if the privilege can be obtained, otherwise it will try to establish a TCP connection on port 7 (Echo) of the destination host. The network interface and ttl parameters let the caller specify which network interface the test will go through and the maximum number of hops the packets should go through. A negative value for the ttl will result in an IllegalArgumentException being thrown. The timeout value, in milliseconds, indicates the maximum amount of time the try should take. If the operation times out before getting an answer, the host is deemed unreachable. A negative value will result in an IllegalArgumentException being thrown. netif - the NetworkInterface through which the test will be done, or null for any interface - `java.net.NetworkInterface` ttl - the maximum numbers of hops to try or 0 for the default - `int` timeout - the time, in milliseconds, before the call aborts - `int` returns: a booleanindicating if the address is reachable. - `boolean` throws: java.lang.IllegalArgumentException - if either timeout or ttl are negative.
site-local-address?clj
(site-local-address? this)Utility routine to check if the InetAddress is a site local address.
returns: a boolean indicating if the InetAddress is
a site local address; or false if address is not a site local unicast address. - boolean
Utility routine to check if the InetAddress is a site local address. returns: a boolean indicating if the InetAddress is a site local address; or false if address is not a site local unicast address. - `boolean`
to-stringclj
(to-string this)Converts this IP address to a String. The string returned is of the form: hostname / literal IP address.
If the host name is unresolved, no reverse name service lookup is performed. The hostname part will be represented by an empty string.
returns: a string representation of this IP address. - java.lang.String
Converts this IP address to a String. The string returned is of the form: hostname / literal IP address. If the host name is unresolved, no reverse name service lookup is performed. The hostname part will be represented by an empty string. returns: a string representation of this IP address. - `java.lang.String`
cljdoc is a website building & hosting documentation for Clojure/Script libraries
× close