Liking cljdoc? Tell your friends :D

jdk.net.SocketPermission

This class represents access to a network via sockets. A SocketPermission consists of a host specification and a set of actions specifying ways to connect to that host. The host is specified as

host = (hostname | IPv4address | iPv6reference) [:portrange] portrange = portnumber | -portnumber | portnumber-[portnumber] The host is expressed as a DNS name, as a numerical IP address, or as localhost (for the local machine). The wildcard * may be included once in a DNS name host specification. If it is included, it must be in the leftmost position, as in *.sun.com.

The format of the IPv6reference should follow that specified in RFC 2732: Format for Literal IPv6 Addresses in URLs:

ipv6reference = [ IPv6address ] For example, you can construct a SocketPermission instance as the following:

String hostAddress = inetaddress.getHostAddress(); if (inetaddress instanceof Inet6Address) { sp = new SocketPermission([ hostAddress ]: port, action); } else { sp = new SocketPermission(hostAddress : port, action); } or

String host = url.getHost(); sp = new SocketPermission(host : port, action);

The full uncompressed form of an IPv6 literal address is also valid.

The port or portrange is optional. A port specification of the form N-, where N is a port number, signifies all ports numbered N and above, while a specification of the form -N indicates all ports numbered N and below. The special port value 0 refers to the entire ephemeral port range. This is a fixed range of ports a system may use to allocate dynamic ports from. The actual range may be system dependent.

The possible ways to connect to the host are

accept connect listen resolve The listen action is only meaningful when used with localhost and means the ability to bind to a specified port. The resolve action is implied when any of the other actions are present. The action resolve refers to host/ip name service lookups.

The actions string is converted to lowercase before processing. As an example of the creation and meaning of SocketPermissions, note that if the following permission:

p1 = new SocketPermission(puffin.eng.sun.com:7777, connect,accept);

is granted to some code, it allows that code to connect to port 7777 on puffin.eng.sun.com, and to accept connections on that port.

Similarly, if the following permission:

p2 = new SocketPermission(localhost:1024-, accept,connect,listen);

is granted to some code, it allows that code to accept connections on, connect to, or listen on any port between 1024 and 65535 on the local host.

Note: Granting code permission to accept or make connections to remote hosts may be dangerous because malevolent code can then more easily transfer and share confidential data among parties who may not otherwise have access to the data.

This class represents access to a network via sockets.
A SocketPermission consists of a
host specification and a set of `actions` specifying ways to
connect to that host. The host is specified as


   host = (hostname | IPv4address | iPv6reference) [:portrange]
   portrange = portnumber | -portnumber | portnumber-[portnumber]
The host is expressed as a DNS name, as a numerical IP address,
or as `localhost` (for the local machine).
The wildcard `*` may be included once in a DNS name host
specification. If it is included, it must be in the leftmost
position, as in `*.sun.com`.

The format of the IPv6reference should follow that specified in RFC 2732: Format
for Literal IPv6 Addresses in URLs:


   ipv6reference = `[` IPv6address `]`
For example, you can construct a SocketPermission instance
as the following:


   String hostAddress = inetaddress.getHostAddress();
   if (inetaddress instanceof Inet6Address) {
       sp = new SocketPermission(`[`  hostAddress  `]:`  port, action);
   } else {
       sp = new SocketPermission(hostAddress  `:`  port, action);
   }
or


   String host = url.getHost();
   sp = new SocketPermission(host  `:`  port, action);

The full uncompressed form of
an IPv6 literal address is also valid.

The port or portrange is optional. A port specification of the
form `N-`, where N is a port number, signifies all ports
numbered N and above, while a specification of the
form `-N` indicates all ports numbered N and below.
The special port value 0 refers to the entire ephemeral
port range. This is a fixed range of ports a system may use to
allocate dynamic ports from. The actual range may be system dependent.

The possible ways to connect to the host are


accept
connect
listen
resolve
The `listen` action is only meaningful when used with `localhost` and
means the ability to bind to a specified port.
The `resolve` action is implied when any of the other actions are present.
The action `resolve` refers to host/ip name service lookups.

The actions string is converted to lowercase before processing.
As an example of the creation and meaning of SocketPermissions,
note that if the following permission:



  p1 = new SocketPermission(`puffin.eng.sun.com:7777`, `connect,accept`);

is granted to some code, it allows that code to connect to port 7777 on
puffin.eng.sun.com, and to accept connections on that port.

Similarly, if the following permission:



  p2 = new SocketPermission(`localhost:1024-`, `accept,connect,listen`);

is granted to some code, it allows that code to
accept connections on, connect to, or listen on any port between
1024 and 65535 on the local host.

Note: Granting code permission to accept or make connections to remote
hosts may be dangerous because malevolent code can then more easily
transfer and share confidential data among parties who may not
otherwise have access to the data.
raw docstring

->socket-permissionclj

(->socket-permission host action)

Constructor.

Creates a new SocketPermission object with the specified actions. The host is expressed as a DNS name, or as a numerical IP address. Optionally, a port or a portrange may be supplied (separated from the DNS name or IP address by a colon).

To specify the local machine, use localhost as the host. Also note: An empty host String (``) is equivalent to localhost.

The actions parameter contains a comma-separated list of the actions granted for the specified host (and port(s)). Possible actions are connect, listen, accept, resolve, or any combination of those. resolve is automatically added when any of the other three are specified.

Examples of SocketPermission instantiation are the following:

nr = new SocketPermission(`www.catalog.com`, `connect`);
nr = new SocketPermission(`www.sun.com:80`, `connect`);
nr = new SocketPermission(`*.sun.com`, `connect`);
nr = new SocketPermission(`*.edu`, `resolve`);
nr = new SocketPermission(`204.160.241.0`, `connect`);
nr = new SocketPermission(`localhost:1024-65535`, `listen`);
nr = new SocketPermission(`204.160.241.0:1024-65535`, `connect`);

host - the hostname or IPaddress of the computer, optionally including a colon followed by a port or port range. - java.lang.String action - the action string. - java.lang.String

Constructor.

Creates a new SocketPermission object with the specified actions.
 The host is expressed as a DNS name, or as a numerical IP address.
 Optionally, a port or a portrange may be supplied (separated
 from the DNS name or IP address by a colon).

 To specify the local machine, use `localhost` as the host.
 Also note: An empty host String (``) is equivalent to `localhost`.

 The actions parameter contains a comma-separated list of the
 actions granted for the specified host (and port(s)). Possible actions are
 `connect`, `listen`, `accept`, `resolve`, or
 any combination of those. `resolve` is automatically added
 when any of the other three are specified.

 Examples of SocketPermission instantiation are the following:


    nr = new SocketPermission(`www.catalog.com`, `connect`);
    nr = new SocketPermission(`www.sun.com:80`, `connect`);
    nr = new SocketPermission(`*.sun.com`, `connect`);
    nr = new SocketPermission(`*.edu`, `resolve`);
    nr = new SocketPermission(`204.160.241.0`, `connect`);
    nr = new SocketPermission(`localhost:1024-65535`, `listen`);
    nr = new SocketPermission(`204.160.241.0:1024-65535`, `connect`);

host - the hostname or IPaddress of the computer, optionally including a colon followed by a port or port range. - `java.lang.String`
action - the action string. - `java.lang.String`
raw docstring

equalsclj

(equals this obj)

Checks two SocketPermission objects for equality.

obj - the object to test for equality with this object. - java.lang.Object

returns: true if obj is a SocketPermission, and has the same hostname, port range, and actions as this SocketPermission object. However, port range will be ignored in the comparison if obj only contains the action, 'resolve'. - boolean

Checks two SocketPermission objects for equality.

obj - the object to test for equality with this object. - `java.lang.Object`

returns: true if obj is a SocketPermission, and has the
  same hostname, port range, and actions as this
  SocketPermission object. However, port range will be ignored
  in the comparison if obj only contains the action, 'resolve'. - `boolean`
raw docstring

get-actionsclj

(get-actions this)

Returns the canonical string representation of the actions. Always returns present actions in the following order: connect, listen, accept, resolve.

returns: the canonical string representation of the actions. - java.lang.String

Returns the canonical string representation of the actions.
 Always returns present actions in the following order:
 connect, listen, accept, resolve.

returns: the canonical string representation of the actions. - `java.lang.String`
raw docstring

hash-codeclj

(hash-code this)

Returns the hash code value for this object.

returns: a hash code value for this object. - int

Returns the hash code value for this object.

returns: a hash code value for this object. - `int`
raw docstring

impliesclj

(implies this p)

Checks if this socket permission object implies the specified permission.

More specifically, this method first ensures that all of the following are true (and returns false if any of them are not):

p is an instanceof SocketPermission, p's actions are a proper subset of this object's actions, and p's port range is included in this port range. Note: port range is ignored when p only contains the action, 'resolve'.

Then implies checks each of the following, in order, and for each returns true if the stated condition is true:

If this object was initialized with a single IP address and one of p's IP addresses is equal to this object's IP address. If this object is a wildcard domain (such as *.sun.com), and p's canonical name (the name without any preceding *) ends with this object's canonical host name. For example, *.sun.com implies *.eng.sun.com. If this object was not initialized with a single IP address, and one of this object's IP addresses equals one of p's IP addresses. If this canonical name equals p's canonical name.

If none of the above are true, implies returns false.

p - the permission to check against. - java.security.Permission

returns: true if the specified permission is implied by this object, false if not. - boolean

Checks if this socket permission object `implies` the
 specified permission.

 More specifically, this method first ensures that all of the following
 are true (and returns false if any of them are not):

  p is an instanceof SocketPermission,
  p's actions are a proper subset of this
 object's actions, and
  p's port range is included in this port range. Note:
 port range is ignored when p only contains the action, 'resolve'.


 Then implies checks each of the following, in order,
 and for each returns true if the stated condition is true:

  If this object was initialized with a single IP address and one of p's
 IP addresses is equal to this object's IP address.
 If this object is a wildcard domain (such as *.sun.com), and
 p's canonical name (the name without any preceding *)
 ends with this object's canonical host name. For example, *.sun.com
 implies *.eng.sun.com.
 If this object was not initialized with a single IP address, and one of this
 object's IP addresses equals one of p's IP addresses.
 If this canonical name equals p's canonical name.


 If none of the above are true, implies returns false.

p - the permission to check against. - `java.security.Permission`

returns: true if the specified permission is implied by this object,
 false if not. - `boolean`
raw docstring

new-permission-collectionclj

(new-permission-collection this)

Returns a new PermissionCollection object for storing SocketPermission objects.

SocketPermission objects must be stored in a manner that allows them to be inserted into the collection in any order, but that also enables the PermissionCollection implies method to be implemented in an efficient (and consistent) manner.

returns: a new PermissionCollection object suitable for storing SocketPermissions. - java.security.PermissionCollection

Returns a new PermissionCollection object for storing SocketPermission
 objects.

 SocketPermission objects must be stored in a manner that allows them
 to be inserted into the collection in any order, but that also enables the
 PermissionCollection implies
 method to be implemented in an efficient (and consistent) manner.

returns: a new PermissionCollection object suitable for storing SocketPermissions. - `java.security.PermissionCollection`
raw docstring

cljdoc is a website building & hosting documentation for Clojure/Script libraries

× close