Liking cljdoc? Tell your friends :D

This project uses Break Versioning.

v3.4.2 (2024-05-26)

Dep: Nippy is on Clojars.
Versioning: Nippy uses Break Versioning.

This release updates some internal dependencies and is recommended for all existing users.

It should be a non-breaking update for almost all users of Nippy v3.4.x, v3.3.x, and v3.2.x.

Notes:

  • May produce different serialized output to v3.4.0 and v3.3.0. Most users won't care about this, but you could be affected if you depend on specific serialized byte values (for example by comparing serialized output between different versions of Nippy).
  • When using Nippy version X to thaw data frozen by Nippy version Y>X, there is necessarily a risk of the thaw throwing when encountering unfamiliar types. This can affect rolling updates and/or limit your ability to revert a Nippy update - so please ensure adequate testing in your environment before updating against production data!
  • As always, please report any unexpected problems 🙏

- Peter Taoussanis

v3.4.1 (2024-05-02)

Dep: Nippy is on Clojars.
Versioning: Nippy uses Break Versioning.

Like v3.4.0 but introduces an internal mechanism to help make it easier for some users that do rolling updates from earlier versions of Nippy.

Still, the usual warning applies: data frozen by Nippy version X should ideally be thawed by version >= X, otherwise you run the risk of the thaw throwing when unfamiliar types are encountered. Please note that this can affect rolling updates, and can limit your ability to revert a Nippy update. Please ensure adequate testing in your environment before updating against production data!

- Peter Taoussanis

Changes since v3.4.0

  • [mod] Due to some internal format changes, Nippy v3.4.1 may produce different serialized output to v3.4.0 and earlier versions of Nippy. Most users won't care about this, but you could be affected if you depend on specific serialized byte values (for example by comparing serialized output between different versions of Nippy).

v3.4.0 (2024-04-30)

Dep: Nippy is on Clojars.
Versioning: Nippy uses Break Versioning.

This is a non-breaking feature and maintenance release and should be a safe update for existing users. But as always, please test carefully and report any unexpected problems, thank you! 🙏

IMPORTANT: data frozen by Nippy version X should always be thawed by version >= X, otherwise you run the risk of the thaw throwing when encountering unfamiliar types. Please note that this can affect rolling updates, and can limit your ability to revert a Nippy update. Please ensure adequate testing in your environment before updating against production data.

- Peter Taoussanis

Changes since v3.3.0 (2023-10-11)

  • 82a050b [mod] Don't attach empty metadata (meta will now be nil rather than {})

Fixes since v3.3.0 (2023-10-11)

  • 92c4a83 [fix] Broken *final-freeze-fallback* default val

New since v3.3.0 (2023-10-11)

  • fb6f75e [new] Smarter, faster, protocol-based freezable? util
  • 6ad5aeb [new] Add :zstd compressor, new compressor backend
  • 9db09e1 [new] [#163] Track serialized output in tests
  • dcc6b08 [new] [#164] Update benchmarks
  • f3ff7ae [new] Add native MapEntry freezer
  • 37cf415 [new] [#171] Auto strip metadata protocol extensions
  • Misc internal improvements

Everything since v3.4.0-RC3 (2024-04-10)

  • Update dependencies

v3.4.0-RC3 (2024-04-10)

📦 Available on Clojars, this project uses Break Versioning.

This is a non-breaking feature and maintenance pre-release.
Please test carefully and report any unexpected problems, thank you! 🙏

New since v3.3.0

  • fb6f75e [new] Smarter, faster, protocol-based freezable? util
  • 6ad5aeb [new] Add :zstd compressor, new compressor backend
  • 9db09e1 [new] [#163] Track serialized output in tests
  • dcc6b08 [new] [#164] Update benchmarks
  • f3ff7ae [new] Add native MapEntry freezer
  • 37cf415 [new] [#171] Auto strip metadata protocol extensions
  • Misc internal improvements

Everything since v3.4.0-RC2

  • 82a050b [mod] Don't attach empty metadata
  • 92c4a83 [fix] Broken *final-freeze-fallback* default val
  • 37cf415 [new] [#171] Auto strip metadata protocol extensions
  • Update dependencies

v3.4.0-RC2 (2024-02-26)

📦 Available on Clojars, this project uses Break Versioning.

This is a non-breaking feature and maintenance pre-release.
Please test carefully and report any unexpected problems, thank you! 🙏

New since v3.3.0

  • fb6f75e [new] Smarter, faster, protocol-based freezable? util
  • 6ad5aeb [new] Add :zstd compressor, new compressor backend
  • 9db09e1 [new] [#163] Track serialized output in tests
  • dcc6b08 [new] [#164] Update benchmarks
  • f3ff7ae [new] Add native MapEntry freezer
  • Misc internal improvements

Everything since v3.4.0-RC1

  • cb5b7cf [fix] [#169] Can't auto-identify :zstd compressor when decompressing
  • cb0b871 Revert [mod] 578c585 (upstream fix now available)
  • Update dependencies

v3.4.0-RC1 (2024-02-06)

📦 Available on Clojars, this project uses Break Versioning.

This is a non-breaking feature and maintenance pre-release.
Please test carefully and report any unexpected problems, thank you! 🙏

Changes since v3.3.0

  • 578c585 [mod] Remove nippy/snappy-compressor

New since v3.3.0

  • fb6f75e [new] Smarter, faster, protocol-based freezable? util
  • 6ad5aeb [new] Add :zstd compressor, new compressor backend
  • 9db09e1 [new] [#163] Track serialized output in tests
  • dcc6b08 [new] [#164] Update benchmarks
  • f3ff7ae [new] Add native MapEntry freezer
  • Misc internal improvements

v3.3.0 (2023-10-11)

📦 Available on Clojars, this project uses Break Versioning.

Identical to v3.3.0-RC2.

This is a non-breaking feature and maintenance release.
Please test carefully and report any unexpected problems, thank you! 🙏

Changes since v3.2.0

  • [mod] Due to micro-optimizations of some elementary types, Nippy v3.3 may produce different serialized output to earlier versions of Nippy. Most users won't care about this, but you could be affected if you depend on specific serialized byte values (for example by comparing serialized output between different versions of Nippy).

Fixes since v3.2.0

  • fa1cc66 [fix] [#143] Don't freeze meta info for types that don't support with-meta

New since v3.2.0

  • 89f98b4 [new] [#153] PoC: transducer support on thaw
  • 60bc4e9 [new] [Storage efficiency] PoC: unsigned counts for small core colls
  • 0a9d670 [new] [Storage efficiency] PoC: separate signed long types
  • 8778fa4 [new] Include :bindings in ex-data of thaw failures
  • aba153e [new] [#159] Add native impln for java.sql.Date (@philomates)
  • d8b1825 [new] [#158] Add java.lang.ClassCastException to default thaw allow list (@carlosgeos)
  • 8b7186a [new] Update benchmark results
  • 3ac06b6 [new] Refactor tools ns, embed dynamic *freeze-opts* in wrappers
  • 129ce95 [new] [#151] [#140] Add experimental public-types-spec

Other improvements since v3.2.0

  • Improved some docstrings
  • Improved generative unit tests
  • Updated internal dependencies

v3.4.0-beta1 (2023-09-26)

📦 Available on Clojars

This is a non-breaking feature pre-release.
Please test carefully and report any unexpected problems, thank you! 🙏

New since v3.3.0-RC2

  • 6ad5aeb [new] Add :zstd compressor, new (faster) compressor backend, better docstrings
  • fb6f75e [new] Smarter, faster, protocol-based freezable? util
  • f3ff7ae [new] Add native MapEntry freezer
  • fef079d [new] Add subvec to stress data
  • Misc internal improvements

Other improvements since v3.3.0-RC2

  • e0cd003 [nop] Update docs
  • 99970d5 [nop] Update benchmark results
  • bcf7673 [nop] Move benchmarks ns under tests dir

v3.3.0-RC2 (2023-09-25)

📦 Available on Clojars

Identical to v3.3.0-RC1 except:

  • Improves some docstrings
  • Improves generative unit tests
  • Updates internal dependencies

If no unexpected problems come up, v3.3.0 final is planned for release by the end of September.

v3.3.0-RC1 (2023-08-02)

📦 Available on Clojars

This is a non-breaking feature and maintenance pre-release.
Please test carefully and report any unexpected problems, thank you! 🙏

Fixes since v3.2.0

  • fa1cc66 [fix] [#143] Don't freeze meta info for types that don't support with-meta

New since v3.2.0

  • 89f98b4 [new] [#153] PoC: transducer support on thaw
  • 60bc4e9 [new] [Storage efficiency] PoC: unsigned counts for small core colls
  • 0a9d670 [new] [Storage efficiency] PoC: separate signed long types
  • 8778fa4 [new] Include :bindings in ex-data of thaw failures
  • aba153e [new] [#159] Add native impln for java.sql.Date (@philomates)
  • d8b1825 [new] [#158] Add java.lang.ClassCastException to default thaw allow list (@carlosgeos)
  • 8b7186a [new] Update benchmark results
  • 3ac06b6 [new] Refactor tools ns, embed dynamic *freeze-opts* in wrappers
  • 129ce95 [new] [#151] [#140] Add experimental public-types-spec

v3.2.0 (2022-07-18)

Identical to v3.2.0-RC3 (2022 Jun 27)

[com.taoensso/nippy "3.2.0"]

This is a non-breaking maintenance release.
See here for recommended steps when updating any Clojure/Script dependencies.

New since v3.1.3

  • [#144] [New] Add org.joda.time.DateTime to default-thaw-serializable-allowlist (@slipset)
  • [#146] [New] Add Graal native configurations (@FieryCod)

Changes since v3.1.3

  • Bump dependencies, incl. minimum Encore version

Fixes since v3.1.1

  • [#89 #150] [Fix] Boxed Booleans incorrectly freezing to primitive true (@RolT)
  • [#148] [Fix] tools/freeze should use *freeze-opts* even for unwrapped vals
  • [#145] [Fix] Freezing custom types with munged field names

The boxed Boolean bug has been around since the first version of Nippy and is mostly relevant to users doing Java interop. For more info see: https://github.com/taoensso/nippy/commit/8909a32bdd654a136da385e0e09c9cc44416f964

v3.2.0-RC3 (2022-06-27)

[com.taoensso/nippy "3.2.0-RC3"]

This is a non-breaking maintenance release.
See here for recommended steps when updating any Clojure/Script dependencies.

New since v3.1.3

  • [#144] [New] Add org.joda.time.DateTime to default-thaw-serializable-allowlist (@slipset)
  • [#146] [New] Add Graal native configurations (@FieryCod)

Changes since v3.1.3

  • Bump dependencies, incl. minimum Encore version

Fixes since v3.1.1

  • [#89 #150] [Fix] Boxed Booleans incorrectly freezing to primitive true (@RolT)
  • [#148] [Fix] tools/freeze should use *freeze-opts* even for unwrapped vals
  • [#145] [Fix] Freezing custom types with munged field names

The boxed Boolean bug has been around since the first version of Nippy and is mostly relevant to users doing Java interop. For more info see: https://github.com/taoensso/nippy/commit/8909a32bdd654a136da385e0e09c9cc44416f964

v3.2.0-RC2 (2022-06-23)

[com.taoensso/nippy "3.2.0-RC2"]

This is a non-breaking maintenance release.
See here for recommended steps when updating any Clojure/Script dependencies.

New since v3.1.3

  • [#144] [New] Add org.joda.time.DateTime to default-thaw-serializable-allowlist (@slipset)
  • [#146] [New] Add Graal native configurations (@FieryCod)

Changes since v3.1.3

  • Bump dependencies, incl. minimum Encore version

Fixes since v3.1.1

  • [#148] [Fix] tools/freeze should use *freeze-opts* even for unwrapped vals
  • [#89 #150] [Fix] Boxed Booleans incorrectly freezing to primitive true (@RolT)

The boxed Boolean bug has been around since the first version of Nippy and is mostly relevant to users doing Java interop. For more info see: https://github.com/taoensso/nippy/commit/8909a32bdd654a136da385e0e09c9cc44416f964

v3.1.3 (2022-06-23)

[com.taoensso/nippy "3.1.3"]

This is a non-breaking, bugfix release.
See here for recommended steps when updating any Clojure/Script dependencies.

Fixes since v3.1.1

  • [#148] [Fix] tools/freeze should use *freeze-opts* even for unwrapped vals
  • [#89 #150] [Fix] Boxed Booleans incorrectly freezing to primitive true (@RolT)

The boxed Boolean bug has been around since the first version of Nippy and is mostly relevant to users doing Java interop. For more info see: https://github.com/taoensso/nippy/commit/8909a32bdd654a136da385e0e09c9cc44416f964

v3.1.1 (2020-11-18)

[com.taoensso/nippy "3.1.1"]

This is a non-breaking, bugfix release. But please note that large keywords or symbols (with >127 characters) frozen with >=v3.1.1 will need >=v3.1.1 to thaw.

Fixes since v3.1.0

  • Large keywords and symbols (with >127 characters) can now thaw without throwing (@danmason).

[1] Keywords or symbols with >127 characters in their name

v3.1.0 (2020-11-06)

[com.taoensso/nippy "3.1.0"]

This is a non-breaking, minor feature release.

New since v3.0.0

  • [#135 #128] Added native freeze/thaw support for java.time classes on JVM 8+: Instant, Duration, Period.
  • [#137] Add thaw-from-resource convenience util.
  • Add (DEPRECATED) swap-serializable-whitelist! for backwards compatibility.

Changes since v3.0.0

  • Add several standard java.time classes to default *thaw-serializable-whitelist*.

v3.1.0-RC1 (2020-10-24)

[com.taoensso/nippy "3.1.0-RC1"]

This is a non-breaking, minor feature release.

New since v3.0.0

  • [#135 #128] Added native freeze/thaw support for java.time.Instant on JVM 8+ (@cnuernber).

v3.0.0 (2020-09-20)

[com.taoensso/nippy "3.0.0"]

This release is focused on smoothing out rough edges left by CVE-2020-24164 [#130], and to ease transition from versions of Nippy < v2.15.0 final.

See here for recommended steps when updating any Clojure/Script dependencies.

Note that there's separate details below for upgrading from v2.15 vs v2.14:

Upgrading from v2.15 (usually non-breaking)

Usually a non-breaking drop-in replacement, but there's some changes you might like to take advantage of. See [#130] for detailed upgrade instructions.

Changes

  • [BREAKING] Bumped minimum Clojure version from v1.5 to v1.7.
  • [BREAKING] :nippy/unthawable responses now have a standardized form: {:nippy/unthawable {:type _ :cause _ ...}. Most folks won't care about this change unless they have code specifically to deal with :nippy/unthawable responses.
  • [Deprecated] *serializable-whitelist* has been split into two separate vars: *freeze-serializable-allowlist*, *thaw-serializable-allowlist*. See [#130] for details.
  • By default, freeze now allows the use of Java's Serializable for any class. thaw continues to be restrictive by default, and will quarantine any objects not on the class allowlist. See [#130] for details.

New

  • [#122] Option to disable freezing and/or thawing of metadata.
  • freeze and thaw now support opts: :serializable-allowlist, :incl-metadata?.
  • New read-quarantined-serializable-object-unsafe! util to read quarantined Serializable objects. See API docs and/or [#130] for details.
  • Add allow-and-record-any-serializable-class-unsafe util. See API docs and/or [#130] for details.

Upgrading from v2.14 (may be BREAKING)

Likely breaking. Please see [#130] for detailed upgrade instructions.

Changes

  • [BREAKING] Bumped minimum Clojure version from v1.5 to v1.7.
  • [BREAKING] [#130] thaw will now quarantine Serializable objects whose class is not allowed by *thaw-serializable-allowlist*. See [#130] for details.
  • [BREAKING] :nippy/unthawable responses now have a standardized form: {:nippy/unthawable {:type _ :cause _ ...}. Most folks won't care about this change unless you have code specifically to deal with :nippy/unthawable responses.
  • [#101] Switch default encryptor from AES-CBC to AES-GCM (faster, includes integrity check)

New

  • [#127] Add utils: freeze-to-string, thaw-from-string (@piotr-yuxuan)
  • [#113 #114] Add support for object arrays (@isaksky)
  • [#83 #112] Add support for deftype (@isaksky)
  • [#83 #113] Add support for URIs (@isaksky)
  • [#126] extend-freeze: include id collision odds in docstring

Fixes

  • [#120] Update freezable? to cover nil

Earlier releases

See here for earlier releases.

Can you improve this documentation?Edit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

Keyboard shortcutsReport a problemcljdoc on GitHub
× close