Liking cljdoc? Tell your friends :D

configurati

Clojars Project Clojars Downloads GitHub Contributors

Clojure library for managing application configuration.

Installation

Add the following dependency to your project.clj file:

[io.logicblocks/configurati "0.5.4"]

Standard Usage

Configurati allows sets of configuration to be defined:

(require '[configurati.core :refer :all])

(def database-configuration
  (define-configuration
    (with-source (env-source :prefix :my-service))
    (with-parameter :database-host)
    (with-parameter :database-port :type :integer)
    (with-parameter :database-schema :default "default-schema")))

This defines a configuration that will look up parameter values in the environment using environ, converting database-port to an integer and leaving all other parameters as strings, defaulting database-schema to "default-schema".

Assuming an environment of:

MY_SERVICE_DATABASE_HOST="db.example.com"
MY_SERVICE_DATABASE_PORT="5000"

this configuration resolves to a map as follows:

(resolve database-configuration)
=>
{:database-host "db.example.com",
 :database-port 5000
 :database-schema "default-schema"}

Parameters

Each parameter has a mandatory name, corresponding to the key used to lookup that parameter in the provided configuration sources. Names are always keywords.

Parameters also have options:

  • :type: specifies the type of the resulting value. Currently, only :any, :string and :integer are supported although the conversions are extensible as detailed in the advanced usage section below. Defaults to :any, performing no conversion of the looked up values.
  • :nilable: whether the parameter can be nil. Either true or false. Defaults to false.
  • :validator: specifies a validator function or keyword referencing a spec to validate the parameter against. Validation occurs post-conversion.
  • :default: the default value to use in the case that no configuration source contains this parameter. The default value is converted before being returned. Defaults to nil.

The with-parameter function accepts all of these options:

(def database-configuration
  (define-configuration
    (with-parameter :database-host)
    (with-parameter :database-port :type :integer)
    (with-parameter :database-scheme :default "default-schema")
    (with-parameter :database-timeout 
      :type :integer :nilable true :validator #(<= % 30000))
    ...))

Sources

Each parameter is looked up in a configuration source. A configuration source is anything that implements clojure.lang.ILookup.

There are a number of configuration sources included with Configurati as detailed in the subsequent sections.

map-source

map-source uses an in memory map to look up parameter values:

(def database-configuration
  (define-configuration
    (with-source (map-source 
                   {:database-username "some-username"
                    :database-password "some-password"}))
    ...))

env-source

env-source uses environ to look up parameter values such that configuration can come from environment variables, system properties or via the build system (lein or boot).

env-source takes an optional prefix prepended to the parameter name before look up.

(def database-configuration
  (define-configuration
    (with-source (env-source :prefix :my-service))
    ...))

yaml-file-source

yaml-file-source loads configuration from a YAML file at the provided path. Under the covers, yaml-file-source uses slurp so everything it supports, e.g., URIs, are also supported.

yaml-file-source takes an optional prefix prepended to the parameter name before look up.

(def database-configuration
  (define-configuration
    (with-source (yaml-file-source "path/to/config.yaml" 
                   :prefix :my-service))
    ...))

The file at path/to/config.yaml would look something like:

my_service_database_username: "some-username"
my_service_database_password: "some-password"

multi-source

Sometimes it is useful to look up configuration from a number of different sources that form a configuration hierarchy.

multi-source takes a number of sources and looks up parameter values in the order the sources are specified at construction.

(def database-configuration
  (define-configuration
    (with-source
      (multi-source 
        (env-source)
        (yaml-file-source "path/to/config.yaml")))
    ...))

Note, if multiple sources are provided to define-configuration, a multi-source is automatically created in the background passing the sources in the same order as they are provided.

Source Middleware

Sources support middleware allowing parameter keys to be transformed before they are passed to the source and parameter values to be transformed before they are returned.

Configurati includes a number of parameter value transforming middlewares as detailed in the subsequent sections.

json-parsing-middleware

json-parsing-middleware parses parameter values as JSON. It allows configuration of:

  • which parameters to target;
  • how to perform the parsing.

By default, json-parsing-middleware parses all parameter values retrieved from the source, converting keys to keywords but not changing their casing:

(def issuer-configuration
  (define-configuration
    (with-source
      (map-source 
        {:issuer-1 "{\"url\": \"https://issuer-1.example.com\"}"
         :issuer-2 "{\"url\": \"https://issuer-2.example.com\"}"})
      (with-middleware (json-parsing-middleware)))
    (with-parameter :issuer-1)
    (with-parameter :issuer-2)))

which resolves to:

(resolve issuer-configuration)
; =>
; {:issuer-1 {:url "https://issuer-1.example.com"}
;  :issuer-2 {:url "https://issuer-2.example.com"}}

To convert only certain parameters, pass their parameter keys in the :only option:

(def issuer-configuration
  (define-configuration
    (with-source
      (map-source 
        {:issuer "{\"url\": \"https://issuer-1.example.com\"}"
         :timeout 10000})
       (with-middleware 
         (json-parsing-middleware
           :only [:issuer])))
    (with-parameter :issuer)
    (with-parameter :timeout)))

which resolves to:

(resolve issuer-configuration)
; =>
; {:issuer {:url "https://issuer-1.example.com"}
;  :timeout 10000}

To configure parsing, there are two options available:

  • :key-fn replaces the function used to convert keys in the resulting map;
  • :parse-fn replaces the entire JSON parsing function.

For example, to kebab case keys:

(require '[camel-snake-kebab.core :as csk])

(def issuer-configuration
  (define-configuration
    (with-source
      (map-source 
        {:authentication "{\"issuerUrl\": \"https://issuer-1.example.com\"}"})
       (with-middleware 
         (json-parsing-middleware
           :key-fn csk/kebab-case-keyword)))
    (with-parameter :authentication)))

which resolves to:

(resolve issuer-configuration)
; =>
; {:authentication {:issuer-url "https://issuer-1.example.com"}}

separator-parsing-middleware

separator-parsing-middleware splits parameter values on a separator. It allows configuration of:

  • which parameters to target;
  • how to perform the parsing.

By default, separator-parsing-middleware parses all parameter values retrieved from the source, splitting on comma:

(def supplier-configuration
  (define-configuration
    (with-source
      (map-source 
        {:countries "USA,GBR,DEU"
         :currencies "USD,GBP,EUR"})
      (with-middleware (separator-parsing-middleware)))
    (with-parameter :countries)
    (with-parameter :currencies)))

which resolves to:

(resolve issuer-configuration)
; =>
; {:countries ["USA" "GBR" "DEU"]
;  :currencies ["USD" "GBP" "EUR"]}
(def supplier-configuration
  (define-configuration
    (with-source
      (map-source 
        {:countries "USA,GBR,DEU"
         :name "Supplier, Ltd."})
      (with-middleware (separator-parsing-middleware)))
    (with-parameter :countries)
    (with-parameter :currencies)))

which resolves to:

(resolve issuer-configuration)
; =>
; {:countries ["USA" "GBR" "DEU"]
;  :name "Supplier, Ltd."}

To configure parsing, there are three options available:

  • :separator defines the character on which to split, defaulting to ",";
  • :trim indicates whether to trim the split values, defaulting to true;
  • :parse-fn which replaces the entire parsing function, ignoring the above two options.

For example, to split on pipe characters:

(require '[camel-snake-kebab.core :as csk])

(def supplier-configuration
  (define-configuration
    (with-source
      (map-source 
        {:countries "USA|GBR|DEU"})
       (with-middleware 
         (separator-parsing-middleware
           :separator "|")))
    (with-parameter :countries)))

which resolves to:

(resolve supplier-configuration)
; =>
; {:countries ["USA" "GBR" "DEU"]}

Key Functions

You may wish to refer to configuration parameters differently in code compared to how they are specified in the configuration sources. Key functions enable this.

When a configuration is defined, one or more key functions can be provided allowing keys to be transformed during configuration resolution. A key function receives each key and returns its replacement. A number of key functions are provided in configurati.key-fns.

(require '[configurati.key-fns :refer [add-prefix remove-prefix]])

(def api-configuration
  (define-configuration
    (with-source
      (map-source {:api-username "some-username"
                   :api-password "some-password"
                   :api-port     "5000"}))
    (with-parameter :api-username)
    (with-parameter :api-password)
    (with-parameter :api-port :type :integer)
    (with-key-fn (remove-prefix :api))
    (with-key-fn (add-prefix :service))))

(resolve api-configuration)
=>
{:service-username "some-username"
 :service-password "some-password"
 :service-port     5000}

Transformations

In some cases, you may need to change the shape of a configuration map or add, modify or remove elements from it. Transformations enable this.

When a configuration is defined, one or more transformations can be provided allowing the configuration map to be transformed during configuration resolution. A transformation function receives the resolved configuration map and returns it after applying the transformation.

(require '[configurati.key-fns :refer [add-prefix remove-prefix]])

(def api-configuration
  (define-configuration
    (with-source
      (map-source {:username "some-username"
                   :password "some-password"
                   :port     "5000"}))
    (with-parameter :username)
    (with-parameter :password)
    (with-parameter :port :type :integer)
    (with-transformation (fn [m] {:api m}))))

(resolve api-configuration)
=>
{:api
 {:username "some-username"
  :password "some-password"
  :port     5000}}

Specifications

A set of parameters makes up a configuration specification. Configuration specifications can be created separately from defining configuration:

(def database-configuration-specification
  (define-configuration-specification
    (with-parameter :database-host)
    (with-parameter :database-port :type :integer)
    (with-parameter :database-scheme :default "default-schema")))

...

(def database-configuration
  (define-configuration
    (with-specification
      database-configuration-specification)
    ...))

This is useful if different configuration sources need to be used at different times for the same configuration specification.

define-configuration supports multiple specifications whose parameters are merged together to form one specification. Additional parameters can also be specified:

(def database-configuration-specification
  (define-configuration-specification
    (with-parameter :database-host)
    (with-parameter :database-port :type :integer)
    (with-parameter :database-scheme :default "default-schema")))

(def service-configuration-specification
  (define-configuration-specification
    (with-parameter :service-host)
    (with-parameter :service-port :type :integer)
    (with-parameter :service-token)))

...

(def database-configuration
  (define-configuration
    (with-specification
      database-configuration-specification)
    (with-specification
      service-configuration-specification)
    (with-parameter :other-parameter)
    ...))

is the same as:

(def database-configuration
  (define-configuration
    (with-parameter :database-host)
    (with-parameter :database-port :type :integer)
    (with-parameter :database-scheme :default "default-schema")
    (with-parameter :service-host)
    (with-parameter :service-port :type :integer)
    (with-parameter :service-token)
    (with-parameter :other-parameter)
    ...))

A configuration specification optionally takes one or more key functions similar to those described above:

(require '[configurati.key-fns :refer [remove-prefix]])

(def database-configuration-specification
  (define-configuration-specification
    (with-key-fn (remove-prefix :api))
    ...))

When configuration specifications are merged as part of a definition, their key functions are composed together in the reverse order the specifications are provided with any key functions on the definition itself applying last:

(def specification-1
  (define-configuration-specification
    (with-key-fn (fn [key] (str "s1-" (name key))))))
    
(def specification-2
  (define-configuration-specification
    (with-key-fn (fn [key] (str "s2-" (name key))))))
    
(def configuration
  (define-configuration
    (with-specification specification-1)
    (with-specification specification-2)
    (with-parameter :param)
    (with-key-fn (fn [key] (str "def-" (name key))))
    (with-key-fn (fn [key] (keyword key)))
    (with-source (map-source {:param "val"}))))

(resolve configuration)
=>
{:def-s2-s1-param "val"}

Advanced Usage

Custom converters

To add a parameter type, implement the convert-to multimethod in configurati.conversions:

(require '[configurati.conversions :refer [convert-to]])

(defmethod convert-to :boolean [_ value]
  (if (#{"true" true} value) true false))

(def configuration
  (define-configuration
    (with-source (map-source {:encrypted? "true"}))
    (with-parameter :encrypted? :type :boolean)))

(resolve configuration)
=>
{:encrypted? true}

Custom middleware

To create a custom middleware, create a function that returns a function as follows:

(defn custom-middleware []
  (fn [source parameter-name]
   ...))

Within the body of the returned function, call source with parameter-name or a derivative, transform and return the response.

License

Copyright © 2021 LogicBlocks

Distributed under the MIT license.

Can you improve this documentation? These fine people already did:
Toby Clemson & Circle CI
Edit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

× close