Liking cljdoc? Tell your friends :D

Queries

Introduction

Crux is a document database that provides you with a comprehensive means of traversing and querying across all of your documents and data without any need to define a schema ahead of time. This is possible because Crux is "schemaless" and automatically indexes the top-level fields in all of your documents to support efficient ad-hoc joins and retrievals. With these capabilities you can quickly build queries that match directly against the relations in your data without worrying too much about the shape of your documents or how that shape might change in future.

Crux is also a graph database. The central characteristic of a graph database is that it can support arbitrary-depth graph queries (recursive traversals) very efficiently by default, without any need for schema-level optimisations. Crux gives you the ability to construct graph queries via a Datalog query language and uses graph-friendly indexes to provide a powerful set of querying capabilities. Additionally, when Crux’s indexes are deployed directly alongside your application you are able to easily blend Datalog and code together to construct highly complex graph algorithms.

This page walks through many of the more interesting queries that run as part of Crux’s default test suite. See test/crux/query_test.clj for the full suite of query tests and how each test listed below runs in the wider context.

Extensible Data Notation (edn) is used as the data format for the public Crux APIs. To gain an understanding of edn see Essential EDN for Crux.

Note that all Crux Datalog queries run using a point-in-time view of the database which means the query capabilities and patterns presented in this section are not aware of valid times or transaction times.

Basic Query

A Datalog query consists of a set of variables and a set of clauses. The result of running a query is a result set (or lazy sequence) of the possible combinations of values that satisfy all of the clauses at the same time. These combinations of values are referred to as "tuples".

The possible values within the result tuples are derived from your database of documents. The documents themselves are represented in the database indexes as "entity–attribute–value" (EAV) facts. For example, a single document {:crux.db/id :myid :color "blue" :age 12} is transformed into two facts [[:myid :color "blue"][:myid :age 12]].

In the most basic case, a Datalog query works by searching for "subgraphs" in the database that match the pattern defined by the clauses. The values within these subgraphs are then returned according to the list of return variables requested in the :find vector within the query.

Our first query runs on a database that contains the following 3 documents which get broken apart and indexed as "entities":

link:./src/docs/examples.clj[role=include]

Note that :ivan, :petr and :smith are edn keywords, which may be used as document IDs in addition to UUIDs.

The following query has 3 clauses, represented as edn vectors within the :where vector. These clauses constrain the result set to match only the entity (or subgraph of interconnected entities) that satisfy all 3 clauses at once:

link:./src/docs/examples.clj[role=include]

Let’s try to work out what these 3 clauses do…​

p1 and n are logical variables. Logic variables are often prefixed with ? for clarity but this is optional.

[p1 :name n] is looking for all entities that have a value under the attribute of :name and then binds the corresponding entity ID to p1 and the corresponding value to n. Since all 3 entities in our database have a :name attribute, this clause alone will simply return all 3 entities.

[p1 :last-name n] reuses the variable n from the previous clause which is significant because it constrains the query to only look for entities where the value of :name (from the first clause) is equal to the value of :last-name (from the second clause). Looking at documents that were processed by our database there is only one possible entity that can be returned, because it has the same values :name and :last-name.

[p1 :name "Smith"] only serves to reinforce the conclusion from the previous two clauses which is that the variable n can only be matched against the string "Smith" within our database.

…​so what is the actual result of the query? Well that is defined by the :find vector which states that only the values corresponding to p1 should be returned, which in this case is simply :smith (the keyword database ID for the document relating to our protagonist "Smith Smith"). Results are returned as an edn set, which means duplicate results will not appear.

Passing the query into crux.api/q (see how to submit a query in 'Get Started'), you get an edn result set containing the value :smith

link:./src/docs/examples.clj[role=include]

Arguments

For the next set of queries we will again use the same set of documents for our database as used in the previous section:

link:./src/docs/examples.clj[role=include]

Query: "Match on entity ID and value"

link:./src/docs/examples.clj[role=include]

Our first query supplies two arguments to the query via a map within the :args vector. The effect of this is to make sure that regardless of whether other :name values in the database also equal "Ivan", that only the entity with an ID matching our specific :ivan ID is considered within the query. Use of arguments means we can avoid hard-coding values directly into the query clauses.

Result Set:

link:./src/docs/examples.clj[role=include]

Query: "Match entities with given values"

link:./src/docs/examples.clj[role=include]

This next query shows how multiple argument values can be mapped to a single field. This allows us to usefully parameterise the input to a query such that we do not have to rerun a single query multiple times (which would be significantly less efficient!).

Result Set:

link:./src/docs/examples.clj[role=include]

Query: "Match entities with given value tuples"

link:./src/docs/examples.clj[role=include]

Here we see how we can extend the parameterisation to match using multiple fields at once.

Result Set:

link:./src/docs/examples.clj[role=include]
link:./src/docs/examples.clj[role=include]

Query: "Use range constraints with arguments"

link:./src/docs/examples.clj[role=include]

Finally we can see how we can return an argument that passes all of the predicates by including it in the :find vector. This essentially bypasses any interaction with the data in our database.

Result Set:

link:./src/docs/examples.clj[role=include]

Predicates

Something else we can do with arguments is apply predicates to them directly within the clauses. Predicates return either true or false but all predicates used in clauses must return true in order for the given combination of field values to be part of the valid result set:

link:./src/docs/examples.clj[role=include]

In this case only :name "Ivan" satisfies [(re-find #"I" n)] (which returns true for any values that begin with "I"). Any fully qualified Clojure function that returns a boolean can be used in place of re-find, for example:

link:./src/docs/examples.clj[role=include]

Result:

link:./src/docs/examples.clj[role=include]

Valid time travel

Congratulations! You already know enough about queries to build a simple CRUD application with Crux. However, your manager has just told you that the new CRUD application you have been designing needs to backfill the historical document versions from the legacy CRUD application. Luckily Crux makes it easy for your application to both insert and retrieve these old versions.

Here we will see how you are able to run queries at a given point in the valid time axis against, implicitly, the most recent transaction time.

First, we transact a very old document into the database with the ID :malcolm and the :name "Malcolm", and specify the valid time instant at which this document became valid in the legacy system: #inst "1986-10-22".

link:./src/docs/examples.clj[role=include]

Next we transact a slightly more recent (though still very old!) revision of that same document where the :name has been corrected to "Malcolma", again using a historical timestamp extracted from the legacy system.

link:./src/docs/examples.clj[role=include]

We are then able to query at different points in the valid time axis to check for the validity of the correction. We define a query q:

link:./src/docs/examples.clj[role=include]

Firstly we can verify that "Malcolma" was unknown at #inst "1986-10-23".

link:./src/docs/examples.clj[role=include]

Result Set:

link:./src/docs/examples.clj[role=include]

We can then verify that "Malcolma" is the currently known :name for the entity with ID :malcolm by simply not specifying a valid time alongside the query. This will be the case so long as there are no newer versions (in the valid time axis) of the document that affect the current valid time version.

link:./src/docs/examples.clj[role=include]

Result Set:

link:./src/docs/examples.clj[role=include]

Joins

Query: "Join across entities on a single attribute"

Given the following documents in the database

link:./src/docs/examples.clj[role=include]

We can run a query to return a set of tuples that satisfy the join on the attribute :name

link:./src/docs/examples.clj[role=include]

Result Set:

link:./src/docs/examples.clj[role=include]

Note that every person joins once, plus 2 more matches.

Query: "Join with two attributes, including a multi-valued attribute"

Given the following documents in the database

link:./src/docs/examples.clj[role=include]

We can run a query to return a set of entities that :follows the set of entities with the :name value of "Ivan"

link:./src/docs/examples.clj[role=include]

Result Set:

link:./src/docs/examples.clj[role=include]

Note that because Crux is schemaless there is no need to have elsewhere declared that the :follows attribute may take a value of edn type set.

Ordering and Pagination

A Datalog query naturally returns a result set of tuples, however, the tuples can also be consumed as a lazy sequence and therefore you will always have an implicit order available. Ordinarily this implicit order is not meaningful because the join order and result order are unlikely to correlate.

The :order-by option is available for use in the query map to explicitly control the result order.

'{:find [time device-id temperature humidity]
  :where [[c :condition/time time]
          [c :condition/device-id device-id]
          [c :condition/temperature temperature]
          [c :condition/humidity humidity]]
  :order-by [[time :desc] [device-id :asc]]}

Use of :order-by will typically require that results are fully-realised by the query engine, however this happens transparently and it will automatically spill to disk when sorting large result sets.

Basic :offset and :limit options are supported however typical pagination use-cases will need a more comprehensive approach because :offset will naively scroll through the initial result set each time.

'{:find [time device-id temperature humidity]
  :where [[c :condition/time time]
          [c :condition/device-id device-id]
          [c :condition/temperature temperature]
          [c :condition/humidity humidity]]
  :order-by [[device-id :asc]]
  :limit 10
  :offset 90}

Pagination relies on efficient retrieval of explicitly ordered documents and this may be achieved using a user-defined attribute with values that get sorted in the desired order. You can then use this attribute within your Datalog queries to apply range filters using predicates.

{:find '[time device-id temperature humidity]
 :where '[[c :condition/time time]
          [c :condition/device-id device-id]
          [(>= device-id my-offset)]
          [c :condition/temperature temperature]
          [c :condition/humidity humidity]]
 :order-by '[[device-id :asc]]
 :limit 10
 :args [{'my-offset 990}]}

Additionally, since Crux stores documents and can traverse arbitrary keys as document references, you can model the ordering of document IDs with vector values, e.g. {:crux.db/id :zoe :closest-friends [:amy :ben :chris]}

More powerful ordering and pagination features may be provided in the future. Feel free to open an issue or get in touch to discuss your requirements.

Rules

This example of a rule demonstrates a recursive traversal of entities that are connected to a given entity via the :follow attribute.

'{:find [?e2]
  :where [(follow ?e1 ?e2)]
  :args [{?e1 :1}]
  :rules [[(follow ?e1 ?e2)
           [?e1 :follow ?e2]]
          [(follow ?e1 ?e2)
           [?e1 :follow ?t]
           (follow ?t ?e2)]]})

Lazy Queries

The function crux.api/q also has a 3-argument arity (db, snapshot and q) that can return results lazily. A snapshot can be retrieved from a node via crux.api/new-snapshot - the snapshot must be closed when no longer used, and the query results must be processed while the snapshot is open. For example, a lazy version of a basic query from the top of this section (using with-open to ensure that the snapshot is closed):

link:./src/docs/examples.clj[role=include]

History API

Full Document History

Crux allows you to retrieve all versions of a document:

link:./src/docs/examples.clj[role=include]

Document History Range

Retrievable document versions can be bounded by four time coordinates:

  • valid-time-start

  • tx-time-start

  • valid-time-end

  • tx-time-end

All coordinates are inclusive. All coordinates can be null.

link:./src/docs/examples.clj[role=include]

Clojure Tips

Quoting

Logic variables used in queries must always be quoted in the :find and :where clauses, which in the most minimal case could look like the following:

(crux/q db
  {:find ['?e]
   :where [['?e :event/employee-code '?code]]}))

However it is often convenient to quote entire clauses or even the entire query map rather than each individual use of every logical variable, for instance:

(crux/q db
  '{:find [?e]
    :where [[?e :event/employee-code ?code]]}))

Confusion may arise when you later attempt to introduce references to Clojure variables within your query map, such as when using :args. This can be resolved by introducing more granular quoting for specific parts of the query map:

(let [my-code 101214]
  (crux/q db
    {:find '[?e]
     :where '[[?e :event/employee-code ?code]]
     :args [{'?code my-code}]}))

Maps and Vectors in data

Say you have a document like so and you want to add it to a Crux db:

{:crux.db/id :me
 :list ["carrots" "peas" "shampoo"]
 :pockets {:left ["lint" "change"]
           :right ["phone"]}}

Crux breaks down vectors into individual components so the query engine is able see all elements on the base level. As a result of this the query engine is not required to traverse any structures or any other types of search algorithm which would slow the query down. The same thing should apply for maps so instead of doing :pocket {:left thing :right thing} you should put them under a namespace, instead structuring the data as :pocket/left thing :pocket/right thing to put the data all on the base level. Like so:

(crux/submit-tx
  node
  [[:crux.tx/put
    {:crux.db/id :me
     :list ["carrots" "peas" "shampoo"]
     :pockets/left ["lint" "change"]
     :pockets/right ["phone"]}]
   [:crux.tx/put
    {:crux.db/id :you
     :list ["carrots" "tomatoes" "wig"]
     :pockets/left ["wallet" "watch"]
     :pockets/right ["spectacles"]}]])

To query inside these vectors the code would be:

(crux/q (crux/db node) '{:find [e l]
                         :where [[e :list l]]
                         :args [{l "carrots"}]})
;; => #{[:you "carrots"] [:me "carrots"]}

(crux/q (crux/db node) '{:find [e p]
                         :where [[e :pockets/left p]]
                         :args [{p "watch"}]})
;; => #{[:you "watch"]}

Note that l and p is returned as a single element as Crux decomposes the vector

DataScript Differences

This list is not necessarily exhaustive and is based on the partial re-usage of DataScript’s query test suite within Crux’s query tests.

Crux does not support:

  • vars in the attribute position, such as [e ?a "Ivan"] or [e _ "Ivan"]

Crux does not yet support:

  • ground, get-else, get-some, missing?, missing? back-ref

  • destructuring

  • source vars, e.g. function references passed into the query via :args

Note that many of these not yet supported query features can be achieved via simple function calls since you can currently fully qualify any function that is loaded. In future, limitations on available functions may be introduced to enforce security restrictions for remote query execution.

Test queries from DataScript such as "Rule with branches" and "Mutually recursive rules" work correctly with Crux and demonstrate advanced query patterns. See the Crux tests for details.

Can you improve this documentation? These fine people already did:
Jeremy Taylor, Daniel Mason, Antonelli712, Jon Pither, Tom Taylor, Ivan Fedorov, Martin Clausen, James Henderson, Александар Симић, Lucio D'Alessandro & Malcolm Sparks
Edit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

× close