Readme — lambdaisland/kaocha 1.68.1059

Liking cljdoc? Tell your friends :D

Full featured next generation test runner for Clojure.

Projects

Project	CI	Docs	Release	Coverage
kaocha
kaocha-cljs
kaocha-cucumber
kaocha-junit-xml
kaocha-cloverage
kaocha-boot
deep-diff

考察 [kǎo chá]

to inspect
to observe and study
on-the-spot investigation

See the Line Dict entry for an audio sample.

Need help?

Are you

reporting a bug? -> File an issue
looking for support? -> Post to the forum
looking to contribute? -> Create a pull request or start by discussing your plans on the forum

There is also a #kaocha channel on Clojurians Slack (sign up here), where users can help each other.

Features

Features include

Filtering tests based on test names or metadata
Watch mode: watch the file system for changes and re-run tests
Pretty, pluggable reporting
Randomize test order
Detect when interrupted with ctrl-C and print report
Fail fast mode: stop at first failure and print report
Profiling (show slowest tests)
Dynamic classpath handling
Tests as data (get test config, test plan, or test results as EDN)
Extensible test types (clojure.test, Midje, ...)
Extensible through plugins
Tool agnostic (Clojure CLI, Leiningen, ...)

This is no replacement for reading the docs, but if you're particularly impatient to try it out, or if you already know Kaocha and need a quick reference how to set up a new project, then this guide is for you.

Clojure CLI (tools.deps)

Add Kaocha as a dependency, preferably under an alias.

;; deps.edn
{:deps { ,,, }
 :aliases
 {:test {:extra-deps {lambdaisland/kaocha {:mvn/version "1.68.1059"}}
         :main-opts ["-m" "kaocha.runner"]}}}

Add a binstub called bin/kaocha

mkdir -p bin
echo '#!/usr/bin/env sh' > bin/kaocha
echo 'clojure -M:test "$@"' >> bin/kaocha
chmod +x bin/kaocha

Leiningen

Add a profile and alias

;; project.clj
(defproject my-proj "0.1.0"
  :dependencies [,,,]
  :profiles {:kaocha {:dependencies [[lambdaisland/kaocha "1.68.1059"]]}}
  :aliases {"kaocha" ["with-profile" "+kaocha" "run" "-m" "kaocha.runner"]})

Add a binstub called bin/kaocha

mkdir -p bin
echo '#!/usr/bin/env sh' > bin/kaocha
echo 'lein kaocha "$@"' >> bin/kaocha
chmod +x bin/kaocha

Boot

In your build.boot add the Kaocha dependency, and import the Kaocha task

;; build.boot
(set-env! :source-paths #{"src"}
          :dependencies '[[lambdaisland/kaocha-boot "..."]])

(require '[kaocha.boot-task :refer [kaocha]])

Add a binstub called bin/kaocha

mkdir -p bin
echo '#!/usr/bin/env sh' > bin/kaocha
echo 'boot kaocha "$@"' >> bin/kaocha
chmod +x bin/kaocha

Clojure CLI (tools.deps) :exec-fn alternative

We also support using the Clojure CLI :exec-fn/-X. However, we recommend the binstub approach above because it allows you to use traditional long and short options. If you nonetheless prefer :exec-fn/-X, you can set up deps.edn:

;; deps.edn
{:deps { ,,, }
 :aliases 
 {:test {:extra-deps {lambdaisland/kaocha {:mvn/version "1.68.1059"}}
         :exec-fn kaocha.runner/exec-fn
         :exec-args {}}}}

And then Kaocha can be invoked this way: clojure -X:test

Generally speaking, we recommend using tests.edn for all of your configuration rather than putting it in exec-args unless there's an alternative combination of options you frequently run.

In that case, you can put configuration options :exec-args as though it were tests.edn. Let's say you frequently use watch with :fail-fast and a subset of tests skipped. You could save that configuration with an additional alias: clojure -X:watch-test like so:

;; deps.edn
{:deps { ,,, }
 :aliases 
 {:test {:extra-deps {lambdaisland/kaocha {:mvn/version "1.68.1059"}}
         :exec-fn kaocha.runner/exec-fn
         :exec-args {}}
 :watch-test {:extra-deps {lambdaisland/kaocha {:mvn/version "1.68.1059"}}
         :exec-fn kaocha.runner/exec-fn
         :exec-args {:watch? true
	 :skip-meta :slow
	 :fail-fast? true }}}}

If you wanted to turn off fail-fast temporarily, you could run clojure -X:watch-test :fail-fast? false

All tools

By default, Kaocha assumes that:

source files are in the src/ folder,
test files are in the test/ folder,
all test namespaces names end with -test (e.g. my-project.core-test). Also, the default test suite id is :unit (just unit on the command line).

If your tests don't seem to run (outcome is 0 tests, 0 assertions, 0 failures) you may need to write up your own configuration: add a tests.edn at the root of the project to configure actual test and source paths, and optionally set a reporter or load plugins (cf. Configuration in the documentation).

Example of a catch-all tests.edn config file (should run all tests found in src/ and /test, in any namespace).

#kaocha/v1
{:tests [{:id          :unit
          :test-paths  ["test" "src"]
          :ns-patterns [".*"]}]
          ;; :reporter kaocha.report.progress/report
          ;; :plugins [:kaocha.plugin/profiling :kaocha.plugin/notifier]
 }

Warning: this is not an optimal configuration. To avoid extra churn, you should try and target only folders and namespaces that actually contain tests.

Run your tests

bin/kaocha

# Watch for changes
bin/kaocha --watch

# Exit at first failure
bin/kaocha --fail-fast

# Only run the `unit` suite
bin/kaocha unit

# Only run a single test
bin/kaocha --focus my.app.foo-test/bar-test

# Use an alternative config file
bin/kaocha --config-file tests_ci.edn

# See all available options
bin/kaocha --test-help

Third party projects

kaocha-noyoda Don't speak like Yoda, write (is (= actual expected)) instead of (is (= expected actual))

Requirements

Kaocha requires Clojure 1.9 or later.

Support Lambda Island Open Source

kaocha is part of a growing collection of quality Clojure libraries and tools released on the Lambda Island label. If you are using this project commercially, then you are expected to pay it forward by becoming a backer on Open Collective, so that we may continue to enjoy a thriving Clojure ecosystem.

Contributing

Everyone has a right to submit patches to kaocha, and thus become a contributor.

Contributors MUST

adhere to the LambdaIsland Clojure Style Guide
write patches that solve a problem. Start by stating the problem, then supply a minimal solution. *
agree to license their contributions as EPL 1.0.
not break the contract with downstream consumers. **
not break the tests.

Contributors SHOULD

update the CHANGELOG and README.
add tests for new functionality.

If you submit a pull request that adheres to these rules, then it will almost certainly be merged immediately. However, some things may require more consideration. If you add new dependencies, or significantly increase the API surface, then we need to decide if these changes are in line with the project's goals. In this case, you can start by writing a pitch, and collecting feedback on it.

* This goes for features too, a feature needs to solve a problem. State the problem it solves, then supply a minimal solution.

** As long as this project has not seen a public release (i.e. is not on Clojars) we may still consider making breaking changes, if there is consensus that the changes are justified.

License

Available under the terms of the Eclipse Public License 1.0, see LICENSE.txt

Can you improve this documentation? These fine people already did:
Arne Brasseur, Alys Brooks, A Brooks, François De Serres, The Alchemist, Wes Morgan, Rick Moynihan, Mitesh Shah, Matthew Boston, fdserr, Ben Lovell, Joel Kaasinen, zengxinhui, Artem Solomatin, Derek Passen, Daniel Compton, José Luis Lafuente & Jose V. TriguerosEdit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

Keyboard shortcuts Report a problem cljdoc on GitHub

× close