Coeffects

This tutorial explains coeffects.

It explains what they are, how they can be "injected", and how to manage them in tests.

What Are They?

Event handlers compute how the world should change in response to an event and, to do that, they need to first know the current state of the world.

coeffects is the current state of the world, as data, as presented to an event handler.

Many event handlers only need applicaton state to do their job - that's as much of "the world" as they need to know about. To make this common case easy to program, there's a specific registration function, called reg-event-db, which delivers ONLY the coeffect db to the event handler (and event of course).

Such an event handler will have this signature:

(fn [db event] 
   ... return updated db)

But event handlers sometimes need to know more about the world OR have more inputs than just application state. Sometimes they need "inputs" like a random number, or a GUID, or the current datetime. Perhaps they need access to LocalStore, or Cookies, or a DataScript connection.

We refer to these inputs collectively as the event handler's coeffects. When more than application state is needed, we use the registration function reg-event-fx and the event handler has a signature like this:

(fn [coeffects event]     ;; first arg is often abreviated to cofx 
    ... return a map of effects)

Notice how previously the first arg was db and now it is coeffects. coeffects is a map, and it contains a :db key which is the current application state. But it can contain other keys holding data about other aspects of the world. So coeffects is a superset of db. It is a bigger world to compute against.

A Motivating Example

Imagine you had an event handler which needed to "know" a value in LocalStore, in order to compute an event's effect.

It could be writen to access data directly from LocalStore:

(reg-event-db
   :load-defaults
   (fn [db _]
     (let [val (js->clj (.getItem js/localStorage "defaults-key"))]  ;; <-- Problem
       (assoc db :defaults val))))

This works, but there's a cost.

Because it has directly accessed LocalStore, this event handler is not pure, and impure functions cause well-documented paper cuts, and paper cuts have a way of accumulating non-linearly.

How We Want It

Our goal in this tutorial is to rewrite this event handler so that it only uses data from arguments (coeffects!). This will take a few steps.

The first is that we switch to using reg-event-fx (instead of reg-event-db).

Event handlers registered via reg-event-fx are slightly different to those registered via reg-event-db. -fx handlers get two arguments, but the first is not db. Instead it is an argument which we will call cofx (that's a nice distinct name which will aid communication).

Previous tutorials showed there's a :db key in cofx. We now want cofx to have other keys and values, like this:

(reg-event-fx                     ;; note: -fx
   :load-defaults
   (fn [cofx event]                 ;; cofx means coeffects
     (let [val (:local-store cofx)  ;; <-- get data from cofx
           db  (:db cofx)]          ;; <-- more data from cofx
       {:db (assoc db :defaults val)}))) ;; returns an effect

Notice how cofx magically contains a :local-store key with the right value. Nice! But how do we make this magic happen?

Abracadabra

Each time an event is "handled", a brand new context (map) is created, and within that context is a :coeffects key which is a further map (initially empty).

That pristine context value (containing, in turn, a pristine :coeffects map) is threaded through the :before function of each interceptor (in the event handler chain) before it finally reaches the registered event handler, which sits on the end of the chain, itself wrapped up in an interceptor. We know this story well from a previous tutorial.

These :before functions have the
opportunity to assoc into the :coeffects map (within the context), cumulatively adding to what it holds.
Later, our event handler, which sits on the end of the chain, finds that its first cofx argument contains just the right data, like, for example, a value for the key :local-store. So, it is the event handler's Interceptor chain which can add to the "world" eventually "seen" by an event handler.

Which Interceptors?

If Interceptors put data in :coeffects, then we'll need to add the right ones when we register our event handler.

Something like this (this handler is the same as before, except for one detail):

(reg-event-fx
   :load-defaults
   [ (inject-cofx :local-store "defaults-key") ]     ;; <-- this is new
   (fn [cofx event]
     (let [val (:local-store cofx)
           db  (:db cofx)]
       {:db (assoc db :defaults val)})))

Look at that - my event handler now has a new Interceptor which will inject (assoc) the right key/value pair (:local-store) into context's :coeffects, which itself is the map which goes on to be the first argument to our event handler (aka cofx).

inject-cofx

inject-cofx is part of the re-frame API.

It is a function which returns an Interceptor whose :before function loads a key/value pair into a context's :coeffects map.

inject-cofx takes either one or two arguments. The first is always the id of the coeffect required (called a cofx-id). The 2nd is an optional additional value.

So, in the case above, the cofx-id was :local-store and the additional value was "defaults-key" which was presumably the LocalStore key.

More inject-cofx

Here's some other usage examples:

• (inject-cofx :random-int 10)
• (inject-cofx :guid)
• (inject-cofx :now)

I could create an event handler which has access to 3 coeffects:

(reg-event-fx
    :some-id
    [(inject-cofx :random-int 10) (inject-cofx :now)  (inject-cofx :local-store "blah")]  ;; 3
    (fn [cofx _]
       ... in here I can access cofx's keys :now :local-store and :random-int))

But that's probably just greedy.

And so, to the final piece in the puzzle: how does inject-cofx know what to do when it is given :now or :local-store? Each cofx-id requires a different action.

Meet reg-cofx

This function is also part of the re-frame API.

It allows you to associate a cofx-id (like :now or :local-store) with a handler function that injects the right key/value pair.

The function you register will be passed two arguments:

• a :coeffects map (to which it should add a key/value pair), and
• optionally, the additional value supplied to inject-cofx

and it is expected to return a modified :coeffects map.

Example Of reg-cofx

Above, we wrote an event handler that wanted :now data to be available. Here is how a handler could be registered for :now:

(reg-cofx               ;; registration function
   :now                 ;; what cofx-id are we registering
   (fn [coeffects _]    ;; second parameter not used in this case
      (assoc coeffects :now (js.Date.))))   ;; add :now key, with value

The outcome is:

1. because that cofx handler above is now registered for :now, I can
2. add an Interceptor to an event handler which
3. looks like (inject-cofx :now)
4. which means within that event handler I can access a :now value from cofx

As a result, my event handler is pure.

Another Example Of reg-cofx

This:

(reg-cofx               ;; new registration function
   :local-store
   (fn [coeffects local-store-key]
      (assoc coeffects
             :local-store
             (js->clj (.getItem js/localStorage local-store-key)))))

With these two registrations in place, I could now use both (inject-cofx :now) and (inject-cofx :local-store "blah") in an event handler's interceptor chain.

To put this another way: I can't use (inject-cofx :blah) UNLESS I have previously used reg-cofx to register a handler for :blah. Otherwise inject-cofx doesn't know how to inject a :blah.

Secret Interceptors

In a previous tutorial we learned that reg-events-db and reg-events-fx add default interceptors to the front of the interceptor chain specified during registration. We found they inserted an Interceptor called do-fx.

I can now reveal that they also add (inject-cofx :db) at the front of each chain.

Guess what that injects into the :coeffects of every event handler? This is how :db is always available to event handlers.

Okay, so that was the last surprise. Now you know everything.

If ever you wanted to use DataScript, instead of an atom-containing-a-map like app-db, you'd replace reg-event-db and reg-event-fx with your own registration functions and have them auto insert the DataScript connection.

Testing

During testing, you may want to stub out certain coeffects.

You may, for example, want to test that an event handler works using a specific now.

In your test, you'd mock out the cofx handler:

(reg-cofx
   :now
   (fn [coeffects _]
      (assoc coeffects :now (js/Date. 2016 1 1)))   ;; then is `:now`

If your test does alter registered coeffect handlers, and you are using cljs.test, then you can use a fixture to restore all coeffects at the end of your test:

(defn fixture-re-frame
  []
  (let [restore-re-frame (atom nil)]
    {:before #(reset! restore-re-frame (re-frame.core/make-restore-fn))
     :after  #(@restore-re-frame)}))

(use-fixtures :each (fixture-re-frame))

re-frame.core/make-restore-fn creates a checkpoint for re-frame state (including registered handlers) to which you can return.

The 5 Point Summary

In note form:

1. Event handlers should only source data from their arguments
2. We want to "inject" required data into the first, cofx argument
3. We use the (inject-cofx :key) interceptor in registration of the event handler
4. It will look up the registered cofx handler for that :key to do the injection
5. We must have previously registered a cofx handler via reg-cofx

---

Previous: Effects       Up: Index       Next: Infographic