Manifold Learning
Manifold Learning
(isomap data k)
(isomap data k d c-isomap)
Isometric feature mapping.
Isomap is a widely used low-dimensional embedding methods, where geodesic distances on a weighted graph are incorporated with the classical multidimensional scaling. Isomap is used for computing a quasi-isometric, low-dimensional embedding of a set of high-dimensional data points. Isomap is highly efficient and generally applicable to a broad range of data sources and dimensionalities.
To be specific, the classical MDS performs low-dimensional embedding based on the pairwise distance between data points, which is generally measured using straight-line Euclidean distance. Isomap is distinguished by its use of the geodesic distance induced by a neighborhood graph embedded in the classical scaling. This is done to incorporate manifold structure in the resulting embedding. Isomap defines the geodesic distance to be the sum of edge weights along the shortest path between two nodes. The top n eigenvectors of the geodesic distance matrix, represent the coordinates in the new n-dimensional Euclidean space.
The connectivity of each data point in the neighborhood graph is defined as its nearest k Euclidean neighbors in the high-dimensional space. This step is vulnerable to 'short-circuit errors' if k is too large with respect to the manifold structure or if noise in the data moves the points slightly off the manifold. Even a single short-circuit error can alter many entries in the geodesic distance matrix, which in turn can lead to a drastically different (and incorrect) low-dimensional embedding. Conversely, if k is too small, the neighborhood graph may become too sparse to approximate geodesic paths accurately.
This class implements C-Isomap that involves magnifying the regions of high density and shrink the regions of low density of data points in the manifold. Edge weights that are maximized in Multi-Dimensional Scaling(MDS) are modified, with everything else remaining unaffected.
data
is the data set.
d
is the dimension of the manifold.
k
is the number of nearest neighbors.
If c-isomap
is true, run C-Isomap algorithm. Otherwise standard algorithm.
Isometric feature mapping. Isomap is a widely used low-dimensional embedding methods, where geodesic distances on a weighted graph are incorporated with the classical multidimensional scaling. Isomap is used for computing a quasi-isometric, low-dimensional embedding of a set of high-dimensional data points. Isomap is highly efficient and generally applicable to a broad range of data sources and dimensionalities. To be specific, the classical MDS performs low-dimensional embedding based on the pairwise distance between data points, which is generally measured using straight-line Euclidean distance. Isomap is distinguished by its use of the geodesic distance induced by a neighborhood graph embedded in the classical scaling. This is done to incorporate manifold structure in the resulting embedding. Isomap defines the geodesic distance to be the sum of edge weights along the shortest path between two nodes. The top n eigenvectors of the geodesic distance matrix, represent the coordinates in the new n-dimensional Euclidean space. The connectivity of each data point in the neighborhood graph is defined as its nearest k Euclidean neighbors in the high-dimensional space. This step is vulnerable to 'short-circuit errors' if k is too large with respect to the manifold structure or if noise in the data moves the points slightly off the manifold. Even a single short-circuit error can alter many entries in the geodesic distance matrix, which in turn can lead to a drastically different (and incorrect) low-dimensional embedding. Conversely, if k is too small, the neighborhood graph may become too sparse to approximate geodesic paths accurately. This class implements C-Isomap that involves magnifying the regions of high density and shrink the regions of low density of data points in the manifold. Edge weights that are maximized in Multi-Dimensional Scaling(MDS) are modified, with everything else remaining unaffected. `data` is the data set. `d` is the dimension of the manifold. `k` is the number of nearest neighbors. If `c-isomap` is true, run C-Isomap algorithm. Otherwise standard algorithm.
(laplacian data k)
(laplacian data k d t)
Laplacian Eigenmap.
Using the notion of the Laplacian of the nearest neighbor adjacency graph, Laplacian Eigenmap compute a low dimensional representation of the dataset that optimally preserves local neighborhood information in a certain sense. The representation map generated by the algorithm may be viewed as a discrete approximation to a continuous map that naturally arises from the geometry of the manifold.
The locality preserving character of the Laplacian Eigenmap algorithm makes it relatively insensitive to outliers and noise. It is also not prone to 'short circuiting' as only the local distances are used.
data
is the data set.
d
is the dimension of the manifold.
k
is the number of nearest neighbors.
t
is the smooth/width parameter of heat kernel
e<sup>-||x-y||<sup>2</sup> / t</sup>. Non-positive value means
discrete weights.
Laplacian Eigenmap. Using the notion of the Laplacian of the nearest neighbor adjacency graph, Laplacian Eigenmap compute a low dimensional representation of the dataset that optimally preserves local neighborhood information in a certain sense. The representation map generated by the algorithm may be viewed as a discrete approximation to a continuous map that naturally arises from the geometry of the manifold. The locality preserving character of the Laplacian Eigenmap algorithm makes it relatively insensitive to outliers and noise. It is also not prone to 'short circuiting' as only the local distances are used. `data` is the data set. `d` is the dimension of the manifold. `k` is the number of nearest neighbors. `t` is the smooth/width parameter of heat kernel e<sup>-||x-y||<sup>2</sup> / t</sup>. Non-positive value means discrete weights.
(lle data k)
(lle data k d)
Locally Linear Embedding.
LLE has several advantages over Isomap, including faster optimization when implemented to take advantage of sparse matrix algorithms, and better results with many problems. LLE also begins by finding a set of the nearest neighbors of each point. It then computes a set of weights for each point that best describe the point as a linear combination of its neighbors. Finally, it uses an eigenvector-based optimization technique to find the low-dimensional embedding of points, such that each point is still described with the same linear combination of its neighbors. LLE tends to handle non-uniform sample densities poorly because there is no fixed unit to prevent the weights from drifting as various regions differ in sample densities.
data
is the data set.
d
is the dimension of the manifold.
k
is the number of nearest neighbors.
Locally Linear Embedding. LLE has several advantages over Isomap, including faster optimization when implemented to take advantage of sparse matrix algorithms, and better results with many problems. LLE also begins by finding a set of the nearest neighbors of each point. It then computes a set of weights for each point that best describe the point as a linear combination of its neighbors. Finally, it uses an eigenvector-based optimization technique to find the low-dimensional embedding of points, such that each point is still described with the same linear combination of its neighbors. LLE tends to handle non-uniform sample densities poorly because there is no fixed unit to prevent the weights from drifting as various regions differ in sample densities. `data` is the data set. `d` is the dimension of the manifold. `k` is the number of nearest neighbors.
(tsne data)
(tsne data d perplexity eta iterations)
t-distributed stochastic neighbor embedding.
t-SNE is a nonlinear dimensionality reduction technique that is particularly well suited for embedding high-dimensional data into a space of two or three dimensions, which can then be visualized in a scatter plot. Specifically, it models each high-dimensional object by a two- or three-dimensional point in such a way that similar objects are modeled by nearby points and dissimilar objects are modeled by distant points.
X
is input data. If X is a square matrix, it is assumed to be the
squared distance/dissimilarity matrix.
d
is the dimension of the manifold.
perplexity
is the perplexity of the conditional distribution.
eta
is the learning rate.
iterations
is the number of iterations.
t-distributed stochastic neighbor embedding. t-SNE is a nonlinear dimensionality reduction technique that is particularly well suited for embedding high-dimensional data into a space of two or three dimensions, which can then be visualized in a scatter plot. Specifically, it models each high-dimensional object by a two- or three-dimensional point in such a way that similar objects are modeled by nearby points and dissimilar objects are modeled by distant points. `X` is input data. If X is a square matrix, it is assumed to be the squared distance/dissimilarity matrix. `d` is the dimension of the manifold. `perplexity` is the perplexity of the conditional distribution. `eta` is the learning rate. `iterations` is the number of iterations.
(umap data)
(umap data distance)
(umap data
k
d
iterations
learningRate
minDist
spread
negativeSamples
repulsionStrength)
(umap data
distance
k
d
iterations
learningRate
minDist
spread
negativeSamples
repulsionStrength)
Unnifold Approximation and Projection.
UMAP is a dimension reduction technique that can be used for visualization similarly to t-SNE, but also for general non-linear dimension reduction. The algorithm is founded on three assumptions about the data:
From these assumptions it is possible to model the manifold with a fuzzy topological structure. The embedding is found by searching for a low dimensional projection of the data that has the closest possible equivalent fuzzy topological structure.
data
is the input data.
distance
is the distance measure.
k
is of k-nearest neighbors. Larger values result in more global views
of the manifold, while smaller values result in more local data
being preserved. Generally in the range 2 to 100.
d
is the target embedding dimensions. defaults to 2 to provide easy
visualization, but can reasonably be set to any integer value
in the range 2 to 100.
iterations
is the number of iterations to optimize the
low-dimensional representation. Larger values result in more
accurate embedding. Muse be at least 10. Choose wise value
based on the size of the input data, e.g, 200 for large
data (1000+ samples), 500 for small.
learningRate
is the initial learning rate for the embedding optimization,
default 1.
minDist
is the desired separation between close points in the embedding
space. Smaller values will result in a more clustered/clumped
embedding where nearby points on the manifold are drawn closer
together, while larger values will result on a more even
disperse of points. The value should be set no-greater than
and relative to the spread value, which determines the scale
at which embedded points will be spread out. default 0.1.
spread
is the effective scale of embedded points. In combination with
minDist, this determines how clustered/clumped the embedded
points are. default 1.0.
negativeSamples
is the number of negative samples to select per positive
sample in the optimization process. Increasing this value will result
in greater repulsive force being applied, greater optimization
cost, but slightly more accuracy, default 5.
repulsionStrength
is the weight applied to negative samples in low
dimensional embedding optimization. Values higher than one will result in
greater weight being given to negative samples, default 1.0.
Unnifold Approximation and Projection. UMAP is a dimension reduction technique that can be used for visualization similarly to t-SNE, but also for general non-linear dimension reduction. The algorithm is founded on three assumptions about the data: - The data is uniformly distributed on a Riemannian manifold; - The Riemannian metric is locally constant (or can be approximated as such); - The manifold is locally connected. From these assumptions it is possible to model the manifold with a fuzzy topological structure. The embedding is found by searching for a low dimensional projection of the data that has the closest possible equivalent fuzzy topological structure. `data` is the input data. `distance` is the distance measure. `k` is of k-nearest neighbors. Larger values result in more global views of the manifold, while smaller values result in more local data being preserved. Generally in the range 2 to 100. `d` is the target embedding dimensions. defaults to 2 to provide easy visualization, but can reasonably be set to any integer value in the range 2 to 100. `iterations` is the number of iterations to optimize the low-dimensional representation. Larger values result in more accurate embedding. Muse be at least 10. Choose wise value based on the size of the input data, e.g, 200 for large data (1000+ samples), 500 for small. `learningRate` is the initial learning rate for the embedding optimization, default 1. `minDist` is the desired separation between close points in the embedding space. Smaller values will result in a more clustered/clumped embedding where nearby points on the manifold are drawn closer together, while larger values will result on a more even disperse of points. The value should be set no-greater than and relative to the spread value, which determines the scale at which embedded points will be spread out. default 0.1. `spread` is the effective scale of embedded points. In combination with minDist, this determines how clustered/clumped the embedded points are. default 1.0. `negativeSamples` is the number of negative samples to select per positive sample in the optimization process. Increasing this value will result in greater repulsive force being applied, greater optimization cost, but slightly more accuracy, default 5. `repulsionStrength` is the weight applied to negative samples in low dimensional embedding optimization. Values higher than one will result in greater weight being given to negative samples, default 1.0.
cljdoc is a website building & hosting documentation for Clojure/Script libraries
× close