4.1.3

Update flatland/ordered to 1.5.9, to avoid conflicting with other libs.

4.1.2

Ship artifacts with Java 8 builds.

4.1.1

Update jetty version to 9.4.36. This is a maintenance update.

4.1.0

Update jetty version to 9.4.28. This is a maintenance update.

4.0.3

Fix ambiguous type inference when running under Java 11

4.0.2

Further FIPS updates and cleanup

4.0.1

Add a FIPS profile and remove SSLv3 support.

4.0.0

Further restrict cipher-suites and protocols to current best practices. See documentation for configuring Jetty for additional details.

3.0.3

This was released but had no code changes

3.0.2

Suppress warning about empty contextPath

3.0.1

This is a bug fix release

With this release we no longer fail to start if so-linger-seconds is set, only warn the user that the seeting will be ignored. This should allow easier upgrade paths.

3.0.0

This is a feature release with backwards breaking changes.

• Java 11 support. This library should now be runnable and compilable on Java 11.
• Jetty version bump from v9.4.11 to v9.4.18. This version bump resolves many issues with Jetty and enables the above Java 11 support. It also breaks several existing configurations.
  • so-linger-seconds option removed. Jetty maintainers realized this option had undefined behavior and removed the underlying option.
  • IOException thrown when failure to bind to port. Previously, this library tested that BindException was thrown and treated it as an API. This was invalid from the Jetty maintainers standpoint (they only test that the more general IOException is thrown).
  • Default Cipher Suite refresh. Only three of the existing default ciphers were still considered by Jetty to be secure enough not to cause warnings on startup. These three cipher suites remain and many additional modern cipher suites have been added.

2.4.1

• PCP-862 Only disconnect if the session has not already been closed.

2.4.0

• PCP-862 Add disconnect function to allow disconnecting from websocket connections rather than closing them
• (maint) Renew expired SSL certificates This renews expired SSL certificates certs/ca.pem, certs/localhost.pem, and certs/localhost.p12, which were causing tests to fail unexpectedly.

2.3.1

• TK-473 Stop reporting jetty version in responses

2.3.0

This is a feature release.

• TK-470 Add MDC support This release adds the ability to use the MDC (Mapped Diagnostic Context) to save per thread diagnostic information about requests. That information may then be output in request logs as desired. For more information see https://logback.qos.ch/manual/mdc.html.
• (maint) Update version dependencies This moves us to using clj-parent 2.x (adds improved support for Java 11 and Clojure 1.9)

2.2.0

This is a dependency update release that should be transparent to users but may have upgrade risks.

• SERVER-2213 Upgrade Jetty to latest This upgrades from Jetty 9.4.4.v20170414 to Jetty 9.4.11.v20180605. The only thing of note noticed in testing is that minimum threads allocated per connection has changed, now scaling up and down with the size of the server's threadpool. This change has not been noticed to cause issue with any default setup, though with a version bump of this size there may be yet uncaught regressions.

2.1.2

This is a bug fix release.

• SERVER-2118 Enable gzipping post request responses. A jetty update requiring HTTP methods to be whitelisted before their responses could be gzipped broke gzipping of POST request responses. This patch updates our jetty configuration to also allow gzipping of POST requests, instead of just GET requests.

2.1.1

This is a bug fix release, but contains important upgrade information.

• SERVER-1597 Enforce disallowed content re-negotiation. Previously, Jetty would allow content negotiation despite being documented as defaulting to disallow. This patch explicitly disallows as a default and provides users the means to allow renegotiation by using the webserver.allow-renegotiation key.

Also, a special thanks to @EdwardBetts for the documentation fix!

2.1.0

This is a feature release.

• TK-451 Support runtime refresh of Jetty CRL via puppetlabs/trapperkeeper-filesystem-watcher. Changes to CRL will result in Jetty reloading the CRL without a server reload or restart.

2.0.1

The 2.0.0 release was mistakenly for a Java 7 runtime even though the underlying Jetty libraries were built for Java 8 runtime. The code for this release is built for a Java 8 runtime instead.

2.0.0

This is a major release

• TK-369 Move Jetty dependency to 9.4.4. Notably, this change drops Java 7 support as Jetty 9.3 and higher only support Java 8 and higher. No public APIs have changed in this release.

• The behavior of normalize-uri-path has changed slightly due to changes in Jetty's URIUtil decodePath method. Specifically, overlong encodings (which are considered invalid UTF-8) change their decoded value (but are still not traversable), and semicolons no longer terminate URI processing, but only when ; is followed at some point by another path segment beginning with /. For example, "/foo/bar;bar=chocolate/baz;baz=bim" now decodes to "/foo/bar/baz" while before it decoded to "/foo/bar". If the request has invalid % encoded UTF-8 characters, the path will be decoded as an ISO-8859-1 encoded string. (https://github.com/eclipse/jetty.project/commit/7f62f2600b943b9aed0e4771891939bf61372c5a)

• TK-373 Enable Diffie Hellman cipher suites. DHE cipher suites were previously disabled due to bugs with DH ciphers on Oracle JDK 7.

• TK-374 Remove obsolete SSL ciphers.

1.8.0

This is a feature release.

• TK-149 Support runtime refresh of Jetty CRL via puppetlabs/trapperkeeper-filesystem-watcher - changes to CRL will be result in Jetty reloading the CRL without a service reload or restart.

1.7.0

This is a feature and bugfix release.

• SERVER-1695 Add an optional request-body-max-size setting for restricting the maximum Content-Length allowed for requests.
• TK-429 Fix for the ability to gzip-encode response bodies when an access log is configured.

1.6.0

This is a "feature" release.

• Added a new function request-path to the WebsocketProtocol
• TK-410 Add the i18n library as a dependency and use it to externalize strings.

1.5.10

This is a maintenance release.

• Remove unneeded logback-access dependency

1.5.9

This is a maintenance release.

• Upgrade ring-servlet and related dependencies to 1.4.0

1.5.8

This is a maintenance release.

• Upgrade java.jmx dependency to 0.3.1

1.5.7

This is a bugfix release.

• TK-372 Fix a memory leak that occurred when a SIGHUP was used to restart services and at least one webserver has Jetty's JMX metrics enabled.

1.5.6

This is a security release.

• TK-343 Support a new option for handler registrations, normalize-request-uri, which can be used to request that the URI path component is sanitized before the handler is invoked for a request and that .getRequestURI calls made by the handler return a path that has been percent-decoded.

1.5.5

This is a bugfix and maintenance release.

• TK-333 Tolerate multiple calls to stop by ensuring that the server shuts down and cleans up mbeans in an idempotent way.
• Upgrade Trapperkeeper dependency to 1.3.1
• Upgrade Clojure dependency to 1.7.0

1.5.4

This is a bugfix release.

• TK-338 Handle the TimeoutException that Jetty throws if its stopTimeout is reached before it can gracefully complete all of the open requests. Ensures that the server will be restarted during a HUP even if the timeout occurs.

1.5.3

This version number was burned due to an error during the release/deploy process.

1.5.2

This is a maintenance release.

• Make org.clojure/java.jmx a top-level dependency so that it can be pulled in automatically via a transitive dependency by consumers of the testutils jar.

1.5.1

This is a bugfix release.

• TK-301 Fix a memory leak related to Jetty's JMX metrics; this leak is only relevant if using the recent HUP support released in Trapperkeeper 1.3.0.

1.5.0

This is a "feature" release.

• Added new function get-server to web routing service.

1.4.1

This is a bugfix release.

• TK-270 Fix a bug that prevented the use of 1-arity WebsocketProtocol/close!.

1.4.0

This is a feature and maintenance release.

• TK-247 Added tests for Path Traversal Attacks.
• Add experimental support for websockets via the add-websockets-handler function in the WebserverService and WebroutingService and corresponding client protocol WebsocketProtocol.
• Updated ssl-utils dependency to 0.8.1

1.3.1

This is a maintenance release.

• TK-195 Update prismatic dependencies to the latest versions

1.3.0

This is a "feature" and security release.

• TK-178 Upgraded Jetty version dependency to v9.2.10. Jetty v9.2.10 includes changes made in the Jetty v9.2.9 release to address a critical security vulnerability with data potentially being leaked across requests. See https://dev.eclipse.org/mhonarc/lists/jetty-announce/msg00074.html for more information. For a rollup of changes included in the Jetty v9.2.10 release, see https://github.com/eclipse/jetty.project/blob/jetty-9.2.10.v20150310/VERSION.txt.

• TK-168 Default values for several settings will now derive from the underlying defaults that Jetty would use. This effectively changes the defaults for the following settings:

  • shutdown-timeout-seconds in webserver section - 60 seconds -> 30 seconds

  • :idle-timeout for add-proxy-route - 60 seconds -> 30 seconds

• TK-148 Several related changes:

  • Default for max-threads in webserver section changed from 100 to 200.

  • Exposed new settings for configuring the number of acceptor-threads and selector-threads that a Jetty webserver will use.

  • Removed work which would automatically bump the server's max-threads up to the minimum needed for the server to boot for the case that max-threads had not been configured but the server's minimum needed threads had exceeded the default max-threads. The original work which enabled the automatic bump had been done in TK-130.

1.2.0

This is a feature release.

• Upgrade to version 9.2.8 of upstream Jetty. We were previously at v9.1.0, which was over a year old. The newer version contains some performance improvements and bug fixes for potential networking issues.
• TK-140 Expose new so-linger-seconds setting, which can be used to adjust the TCP SO_LINGER time.
• TK-144 Expose new post-config-script setting; this is for advanced / edge-case configuration needs. If you need to modify a Jetty setting that we don't expose in our own config, you can provide a snippet of Java code to access the Jetty Server object directly and modify additional settings.
• TK-133 Support comma-delimited strings for the config value for ssl-protocols and cipher-suites. This allows these settings to be used with older config file formats, such as ini.
• TK-151 Expose new idle-timeout-milliseconds setting, which can be used to tell Jetty to forcefully close a client connection if it is idle for a specified amount of time.

1.1.1

• TK-82 Add configuration option to control maximum number of open HTTP connections that Jetty will maintain.
• Upgrade trapperkeeper dependency to 1.0.1.
• Upgrade jvm-ssl-utils (previously known as jvm-certificate-authority) dependency to 0.7.0.

1.1.0

• TK-130 The default value for Jetty's maximum threadpool size is now calculated to ensure it can start up on a box with a large number of cores.

1.0.1

• This release adds an additional configuration option to add-proxy-route (TK-110).

1.0.0

• Promoting previous version to 1.0.0 so that we can begin to be more deliberate about adhering to semver in the future.

0.9.0

This is a security release.

• TK-96: Define a default set of SSL protocols that the server should allow (TLSv1, TLSv1.1, TLSv1.2) and use them if the user doesn't explicitly set the ssl-protocols setting.

0.8.1

This is a minor bugfix release.

• Fix an issue wherein the default graceful shutdown timeout was not being set to 60 seconds.

0.8.0

• Adds a new option, :redirect-if-no-trailing-slash, that determines whether or not a 302 response will be returned when making requests to endpoints with registered handlers without a trailing slash on the end.
• By default, requests will now route through to a handler when no trailing slash is present on the request URL rather than returning a 302 response (which was the behavior in previous versions).
• Adds graceful shutdown support and a new option to the webserver config, shutdown-timeout-seconds, that allows users to set the stop timeout of the Jetty server.

0.7.7

This is a minor feature and bugfix release.

• Improves various error messages thrown by the Webrouting and Webserver services.
• Changes the data structure output by the get-registered-endpoints and log-registered-endpoints functions. Now, a map will be output where each key is an endpoint, with its value being an array containing information on every handler registered at that endpoint.
• Adds a new option to the webserver configuration, access-log-config, that allows configuration of request logging.
• TK-84 Query parameters were not being decoded when the URI was being rewritten in the reified ProxyServlet class, meaning they would get double encoded.
• Adds a new option to add-proxy-route, failure-callback-fn, which allows customization of HTTP Error Responses.

0.7.6

This is a dead release.

0.7.5

This is a minor feature release.

• TK-75 Adds a new option gzip-enable that can be used to enable/disable support for gzipping responses to requests that include an appropriate Accept-Encoding header.

0.7.4

This is a minor feature release.

• Adds a new option to both the static-content configuration setting in the webserver config and to the add-context-handler service function that allows symlinks to be followed when serving static content.

0.7.3

This is a minor feature release.

• Adds a new, optional static-content configuration setting to the webserver config. This setting allows you to serve files on disk or resources in a jar as static assets at a given URL prefix, all via configuration.

0.7.2

This is a minor, backward-compatible feature and bugfix release.

• TK-58: default-server support did not work for some functions, such as get-registered-endpoints.
• Add support for SSL certificate chains, and new setting ssl-cert-chain
• Upgrade to Trapperkeeper 0.5.1

0.7.1

• TK-53: Add a get-route function to web routing service.
• TK-33: Add support for configuring proxy routes to automatically follow redirects from the remote server.
• In proxy configuration, add support for a callback function that can rewrite the URI before the request is proxied.
• TK-45: Add support for strings in addition to keywords when specifying the URI scheme for proxy requests.

0.7.0

• TK-50: Changes to "default" server handling in a multi-server configuration:
  • It is no longer required to specify a default server. If a service function is called without specifying a server-id when there are multiple servers configured, an error will be thrown.
  • It is no longer required that the default server be named default; instead it is configured by specifying default-server: true in the configuration for the given server.
• TK-51: Added the ability to the specify server-id in the WebroutingService configuration, instead of forcing it to be done in code.
• Minor bug fixes and improvements:
  • TK-48, TK-44

0.6.1

• Add configuration option request-header-max-size
• Increase default buffer sizes for request and response
• Update test dependencies to latest version of puppetlabs/http-client (0.2.1)

0.6.0

• The WebserverService can now run multiple Jetty servers, on different ports.
• Added a new WebroutingService to provide a centralized, configuration-based way to configure all of the URL paths at which services will register web applications (Ring handlers, Servlets, etc.)
• Added JMX reporting to the jetty9-service
• Added get-registered-endpoints and log-registered-endpoints functions to the WebserverService
• Minor bug fixes and improvements:
  • TK-21, TK-22, TK-31, TK-43
• Upgraded trapperkeeper dependency to version 0.4.3
• Upgraded kitchensink dependency to version 0.7.2

0.5.2

• Update trapperkeeper dependency to version 0.4.2.
• Update kitchensink dependency to version 0.7.1.
• Update certificate-authority dependency to 0.1.5.
• Update http-client dev dependency to 0.1.7.
• Stop is now called on the Jetty Server instance if an error occurs in Jetty code while the server is starting up. This allows the process running Trapperkeeper to shut down properly after such an error has occurred.
• Validation of the webserver configuration is now done via the use of Prismatic Schema.
• A new webserver option, ssl-crl-path, can be used to configure a Certificate Revocation List that Jetty would use to validate client certificates for incoming SSL connections.

0.5.1

• Upgrade trapperkeeper dependency to version 0.3.12
• Upgrade kitchensink dependency to version 0.7.0
• Replace clj-http dependency with puppetlabs/http-client
• Update test/example configuration files to use HOCON instead of .ini files

0.5.0

• Added new function override-webserver-settings!, which allows another service to provide overridden values for the webserver configuration.
• Update to latest version of puppetlabs/kitchensink
• Use puppetlabs/certificate-authority for all SSL-related tasks

0.4.0

• Added new function add-proxy-route, which supports configuring the server to work as a reverse proxy for certain routes

0.3.5

• Added a new service function, add-context-handler, which supports registering a context handler for static content, with optional support for context listeners via the javax.servlet.ServletContextListener interface.

0.3.4

• Added support for registering WAR files via the add-war-handler service function.
• Moved server creation from the init life cycle to the start life cycles.

0.3.3

• Fix bug where even if no http port was specified in the webserver config, the Jetty webserver was still opening an http binding on port 8080. An http port binding will now be opened only if a port is specified in the config file.
• A config file can now optionally include a client-auth webserver setting. The setting specifies how the server validates the client certificate during the setup of an SSL connection. The default behavior if the setting is not specified is the same as with prior releases; the server will require that the SSL client provide a certificate and that the certificate be valid. For more information, refer to the [jetty-config.md] (doc/jetty-config.md) document.