Tips & Tricks

This page contains various tips and tricks that make it easier to use next.jdbc with a variety of databases. It is mostly organized by database, but there are a few that are cross-database and those are listed first.

CLOB & BLOB SQL Types

Columns declared with the CLOB or BLOB SQL types are typically rendered into Clojure result sets as database-specific custom types but they should implement java.sql.Clob or java.sql.Blob (as appropriate). In general, you can only read the data out of those Java objects during the current transaction, which effectively means that you need to do it either inside the reduction (for plan) or inside the result set builder (for execute! or execute-one!). If you always treat these types the same way for all columns across the whole of your application, you could simply extend next.jdbc.result-set/ReadableColumn to java.sql.Clob (and/or java.sql.Blob). Here's an example for reading CLOB into a String:

(extend-protocol rs/ReadableColumn
  java.sql.Clob
  (read-column-by-label [^java.sql.Clob v _]
    (with-open [rdr (.getCharacterStream v)] (slurp rdr)))
  (read-column-by-index [^java.sql.Clob v _2 _3]
    (with-open [rdr (.getCharacterStream v)] (slurp rdr))))

There is a helper in next.jdbc.result-set to make this easier -- clob->string:

(extend-protocol rs/ReadableColumn
  java.sql.Clob
  (read-column-by-label [^java.sql.Clob v _]
    (clob->string v))
  (read-column-by-index [^java.sql.Clob v _2 _3]
    (clob->string v)))

As noted in Result Set Builders, there is also clob-column-reader that can be used with the as-*-adapter result set builder functions.

No helper or column reader is provided for BLOB data since it is expected that the semantics of any given binary data will be application specific. For a raw byte[] you could probably use:

    (.getBytes v 1 (.length v)) ; BLOB has 1-based byte index!

Consult the java.sql.Blob documentation for more ways to process it.

Note: the standard MySQL JDBC driver seems to return BLOB data as byte[] instead of java.sql.Blob.

Handling Timeouts

JDBC provides a number of ways in which you can decide how long an operation should run before it times out. Some of these timeouts are specified in seconds and some are in milliseconds. Some are handled via connection properties (or JDBC URL parameters), some are handled via methods on various JDBC objects.

Here's how to specify various timeouts using next.jdbc:

• connectTimeout -- can be specified via the "db-spec" hash map or in a JDBC URL, it is the number of milliseconds that JDBC should wait for the initial (socket) connection to complete. Database-specific (may be MySQL only?).
• loginTimeout -- can be set via .setLoginTimeout() on a DriverManager or DataSource, it is the number of seconds that JDBC should wait for a connection to the database to be made. next.jdbc exposes this on the javax.sql.DataSource object it reifies from calling get-datasource on a "db-spec" hash map or JDBC URL string.
• queryTimeout -- can be set via .setQueryTimeout() on a Statement (or PreparedStatement), it is the number of seconds that JDBC should wait for a SQL statement to complete. Since this is the most commonly used type of timeout, next.jdbc exposes this via the :timeout option which can be passed to any function that may construct a Statement or PreparedStatement.
• socketTimeout -- can be specified via the "db-spec" hash map or in a JDBC URL, it is the number of milliseconds that JDBC should wait for socket operations to complete. Database-specific (MS SQL Server and MySQL support this, other databases may too).

Examples:

;; connectTimeout / socketTimeout via db-spec:
(def db-spec {:dbtype "mysql" :dbname "example" :user "root" :password "secret"
              ;; milliseconds:
              :connectTimeout 60000 :socketTimeout 30000}))

;; socketTimeout via JDBC URL:
(def db-url (str "jdbc:sqlserver://localhost;user=sa;password=secret"
                 ;; milliseconds:
                 ";database=model;socketTimeout=10000"))

;; loginTimeout via DataSource:
(def ds (jdbc/get-datasource db-spec))
(.setLoginTimeout ds 20) ; seconds

;; queryTimeout via options:
(jdbc/execute! ds ["select * from some_table"] {:timeout 5}) ; seconds

;; queryTimeout via method call:
(let [ps (jdbc/prepare ds ["select * from some_table"])]
  (.setQueryTimeout ps 10) ; seconds
  (jdbc/execute! ps))

Reducing and Folding with plan

Most of this documentation describes using plan specifically for reducing and notes that you can avoid the overhead of realizing rows from the ResultSet into Clojure data structures if your reducing function uses only functions that get column values by name. If you perform any function on the row that would require an actual hash map or a sequence, the row will be realized into a full Clojure hash map via the builder function passed in the options (or via next.jdbc.result-set/as-maps by default).

One of the benefits of reducing over plan is that you can stream very large result sets, very efficiently, without having the entire result set in memory (assuming your reducing function doesn't build a data structure that is too large!). See the tips below on Streaming Result Sets.

The result of plan is also foldable in the clojure.core.reducers sense. While you could use execute! to produce a vector of fully-realized rows as hash maps and then fold that vector (Clojure's vectors support fork-join parallel reduce-combine), that wouldn't be possible for very large result sets. If you fold the result of plan, the result set will be partitioned and processed using fork-join parallel reduce-combine. Unlike reducing over plan, each row is realized into a Clojure data structure and each batch is forked for reduction as soon as that many rows have been realized. By default, fold's batch size is 512 but you can specify a different value in the 4-arity call. Once the entire result set has been read, the last (partial) batch is forked for reduction. The combining operations are forked and interleaved with the reducing operations, so the order (of forked tasks) is batch-1, batch-2, combine-1-2, batch-3, combine-1&2-3, batch-4, combine-1&2&3-4, etc. The amount of parallelization you get will depend on many factors including the number of processors, the speed of your reducing function, the speed of your combining function, and the speed with which result sets can actually be streamed from your database.

There is no back pressure here so if your reducing function is slow, you may end up with more of the realized result set in memory than your system can cope with.

MS SQL Server

In MS SQL Server, the generated key from an insert comes back as :GENERATED_KEYS.

By default, you won't get table names as qualifiers with Microsoft's JDBC driver (you might with the jTDS drive -- I haven't tried that recently). See this MSDN forum post about .getTableName() for details. According to one of the answers posted there, if you specify :result-type and :concurrency in the options for execute!, execute-one!, plan, or prepare, that will cause SQL Server to return table names for columns. :result-type needs to be :scoll-sensitive or :scroll-insensitive for this to work. :concurrency can be :read-only or :updatable.

MySQL & MariaDB

In MySQL, the generated key from an insert comes back as :GENERATED_KEY. In MariaDB, the generated key from an insert comes back as :insert_id.

MySQL generally stores tables as files so they are case-sensitive if your O/S is (Linux) or case-insensitive if your O/S is not (Mac, Windows) but the column names are generally case-insensitive. This can matter when if you use next.jdbc.result-set/as-lower-maps because that will lower-case the table names (as well as the column names) so if you are round-tripping based on the keys you get back, you may produce an incorrect table name in terms of case. You'll also need to be careful about :table-fn/:column-fn because of this.

It's also worth noting that column comparisons are case-insensitive so WHERE foo = 'BAR' will match "bar" or "BAR" etc.

Batch Statements

Even when using next.jdbc.prepare/execute-batch!, MySQL will still send multiple statements to the database unless you specify :rewriteBatchedStatements true as part of the db-spec hash map or JDBC URL when the datasource is created.

Streaming Result Sets

You should be able to get MySQL to stream very large result sets (when you are reducing over plan) by setting the following options:

• :fetch-size Integer/MIN_VALUE -- when running plan (or when creating a PreparedStatement).

Note: it's possible that other options may be required as well -- I have not verified this yet -- see, for example, the additional options PostgreSQL requires, below.

Oracle

Ah, dear old Oracle! Over the years of maintaining clojure.java.jdbc and now next.jdbc, I've had all sorts of bizarre and non-standard behavior reported from Oracle users. The main issue I'm aware of with next.jdbc is that Oracle's JDBC drivers all return an empty string from ResultSetMetaData.getTableName() so you won't get qualified keywords in the result set hash maps. Sorry!

PostgreSQL

When you use :return-keys true with execute! or execute-one! (or you use insert!), PostgreSQL returns the entire inserted row (unlike nearly every other database that just returns any generated keys!).

If you have a query where you want to select where a column is IN a sequence of values, you can use col = ANY(?) with a native array of the values instead of IN (?,?,?,,,?) and a sequence of values.

What does this mean for your use of next.jdbc? In plan, execute!, and execute-one!, you can use col = ANY(?) in the SQL string and a single primitive array parameter, such as (int-array [1 2 3 4]). That means that in next.jdbc.sql's functions that take a where clause (find-by-keys, update!, and delete!) you can specify ["col = ANY(?)" (int-array data)] for what would be a col IN (?,?,?,,,?) where clause for other databases and require multiple values.

Batch Statements

Even when using next.jdbc.prepare/execute-batch!, PostgreSQL will still send multiple statements to the database unless you specify :reWriteBatchedInserts true as part of the db-spec hash map or JDBC URL when the datasource is created.

Streaming Result Sets

You can get PostgreSQL to stream very large result sets (when you are reducing over plan) by setting the following options:

• :auto-commit false -- when opening the connection
• :fetch-size 4000, :concurrency :read-only, :cursors :close, :result-type :forward-only -- when running plan (or when creating a PreparedStatement).

Working with Arrays

ResultSet protocol extension to read SQL arrays as Clojure vectors.

(import  '[java.sql Array])
(require '[next.jdbc.result-set :as rs])

(extend-protocol rs/ReadableColumn
  Array
  (read-column-by-label [^Array v _]    (vec (.getArray v)))
  (read-column-by-index [^Array v _ _]  (vec (.getArray v))))

Insert and read vector example:

create table example(
  tags varchar[]
);

(execute-one! db-spec
  ["insert into example(tags) values (?)"
    (into-array String ["tag1" "tag2"])])

(execute-one! db-spec
  ["select * from example limit 1"])

;; => #:example{:tags ["tag1" "tag2"]}

Note: PostgreSQL JDBC driver supports only 7 primitive array types, but not array types like UUID[] -
PostgreSQL™ Extensions to the JDBC API.

Working with Date and Time

By default, PostgreSQL's JDBC driver does not always perform conversions from java.util.Date to a SQL data type. You can enable this by extending SettableParameter to the appropriate (Java) types, or by simply requiring next.jdbc.date-time.

In addition, if you want java.time.Instant, java.time.LocalDate, and java.time.LocalDateTime to be automatically converted to SQL data types, requiring next.jdbc.date-time will enable those as well (by extending SettableParameter for you).

next.jdbc.date-time also includes functions that you can call at application startup to extend ReadableColumn to either return java.time.Instant or java.time.LocalDate/java.time.LocalDateTime (as well as a function to restore the default behavior of returning java.sql.Date and java.sql.Timestamp).

Working with Enumerated Types

PostgreSQL has a SQL extension for defining enumerated types and the default set-parameter implementation will not work for those. You can use next.jdbc.types/as-other to wrap string values in a way that the JDBC driver will convert them to enumerated type values:

CREATE TYPE language AS ENUM('en','fr','de');

CREATE TABLE person (
  ...
  speaks language NOT NULL,
  ...
);

(require '[next.jdbc.sql :as sql]
         '[next.jdbc.types :refer [as-other]])

(sql/insert! ds :person {:speaks (as-other "fr")})

That call produces a vector ["fr"] with metadata that implements set-parameter such that .setObject() is called with java.sql.Types/OTHER which allows PostgreSQL to "convert" the string "fr" to the corresponding language enumerated type value.

Working with JSON and JSONB

PostgreSQL has good support for storing, querying and manipulating JSON data. Basic Clojure data structures (lists, vectors, and maps) transform pretty well to JSON data. With a little help next.jdbc can automatically convert Clojure data to JSON and back for us.

First we define functions for JSON encoding and decoding. We're using metosin/jsonista in these examples but you could use any JSON library, such as Cheshire or clojure.data.json.

(require '[jsonista.core :as json])

;; :decode-key-fn here specifies that JSON-keys will become keywords:
(def mapper (json/object-mapper {:decode-key-fn keyword}))
(def ->json json/write-value-as-string)
(def <-json #(json/read-value % mapper))

Next we create helper functions to transform Clojure data to and from PostgreSQL Objects containing JSON:

(import '(org.postgresql.util PGobject))

(defn ->pgobject
  "Transforms Clojure data to a PGobject that contains the data as
  JSON. PGObject type defaults to `jsonb` but can be changed via
  metadata key `:pgtype`"
  [x]
  (let [pgtype (or (:pgtype (meta x)) "jsonb")]
    (doto (PGobject.)
      (.setType pgtype)
      (.setValue (->json x)))))

(defn <-pgobject
  "Transform PGobject containing `json` or `jsonb` value to Clojure
  data."
  [^org.postgresql.util.PGobject v]
  (let [type  (.getType v)
        value (.getValue v)]
    (if (#{"jsonb" "json"} type)
      (with-meta (<-json value) {:pgtype type})
      value)))

Finally we extend next.jdbc.prepare/SettableParameter and next.jdbc.result-set/ReadableColumn protocols to make the conversion between clojure data and PGobject JSON automatic:

(require '[next.jdbc.prepare :as prepare])
(require '[next.jdbc.result-set :as rs])

(import  '[java.sql PreparedStatement])

(set! *warn-on-reflection* true)

;; if a SQL parameter is a Clojure hash map or vector, it'll be transformed
;; to a PGobject for JSON/JSONB:
(extend-protocol prepare/SettableParameter
  clojure.lang.IPersistentMap
  (set-parameter [m ^PreparedStatement s i]
    (.setObject s i (->pgobject m)))

  clojure.lang.IPersistentVector
  (set-parameter [v ^PreparedStatement s i]
    (.setObject s i (->pgobject v))))

;; if a row contains a PGobject then we'll convert them to Clojure data
;; while reading (if column is either "json" or "jsonb" type):
(extend-protocol rs/ReadableColumn
  org.postgresql.util.PGobject
  (read-column-by-label [^org.postgresql.util.PGobject v _]
    (<-pgobject v))
  (read-column-by-index [^org.postgresql.util.PGobject v _2 _3]
    (<-pgobject v)))

Inserting and Querying JSON

Let's assume we have following table:

create table demo (
  id          serial primary key,
  doc_jsonb   jsonb,
  doc_json    json
)

We can now insert Clojure data into json and jsonb fields:

(require '[next.jdbc :as jdbc])
(require '[next.jdbc.sql :as sql])

(def db { ...db-spec here... })
(def ds (jdbc/get-datasource db))

(def test-map
  {:some-key "some val" :nested {:a 1} :null-val nil :vector [1 2 3]})

(def data1
  {:doc_jsonb test-map
   :doc_json  (with-meta test-map {:pgtype "json"})})

(sql/insert! ds :demo data1)

(def test-vector
    [{:a 1} nil 2 "lalala" []])

(def data2
    {:doc_jsonb test-vector
     :doc_json  (with-meta test-vector {:pgtype "json"})})

(sql/insert! ds :demo data2)

And those columns are nicely transformed into Clojure data when querying:

(sql/get-by-id ds :demo 1)
=> #:demo{:id 1,
          :doc_json
          {:some-key "some val",
           :nested {:a 1},
           :vector [1 2 3],
           :null-val nil},
          :doc_jsonb
          {:some-key "some val",
           :nested {:a 1},
           :vector [1 2 3],
           :null-val nil}}

(sql/get-by-id ds :demo 2)
=> #:demo{:id 2,
          :doc_json [{:a 1} nil 2 "lalala" []],
          :doc_jsonb [{:a 1} nil 2 "lalala" []]}

;; Query by value of JSON field 'some-key'
(sql/query ds [(str "select id, doc_jsonb::json->'nested' as foo"
                    "  from demo where doc_jsonb::json->>'some-key' = ?")
               "some val"])
=> [{:demo/id 1, :foo {:a 1}}]

JSON or JSONB?

• A json column stores JSON data as strings (reading and writing is fast but manipulation is slow, field order is preserved)
• A jsonb column stores JSON data in binary format (manipulation is significantly faster but reading and writing is a little slower)

If you're unsure whether you want to use json or jsonb, use jsonb.

SQLite

SQLite supports both bool and bit column types but, unlike pretty much every other database out there, it yields 0 or 1 as the column value instead of false or true. This means that with SQLite alone, you can't just rely on bool or bit columns being treated as truthy/falsey values in Clojure.

You can work around this using a builder that handles reading the column directly as a Boolean:

(jdbc/execute! ds ["select * from some_table"]
               {:builder-fn (rs/builder-adapter
                             rs/as-maps
                             (fn [builder ^ResultSet rs ^Integer i]
                               (let [rsm ^ResultSetMetaData (:rsmeta builder)]
                                 (rs/read-column-by-index
                                   (if (#{"BIT" "BOOL" "BOOLEAN"} (.getColumnTypeName rsm i))
                                     (.getBoolean rs i)
                                     (.getObject rs i))
                                   rsm
                                   i))))})

If you are using plan, you'll most likely be accessing columns by just the label (as a keyword) and avoiding the result set building machinery completely. In such cases, you'll still get bool and bit columns back as 0 or 1 and you'll need to explicitly convert them on a per-column basis since you should know which columns need converting:

(reduce (fn [acc row]
          (conj acc (-> (select-keys row [:name :is_active])
                        (update :is_active pos?))))
        []
        (jdbc/plan ds ["select * from some_table"]))

<: Friendly SQL Functions | Result Set Builders :>