Liking cljdoc? Tell your friends :D

Changes

  • 2.0.0-alpha3 (for early testing; 2021-03-13)
    • Change coordinates to com.github.seancorfield/honeysql (although new versions will continue to be deployed to seancorfield/honeysql for a while -- see the Clojars Verified Group Names policy).
    • Support much richer range of syntax on CREATE/DROP statements in general, including columns, TABLESPACE, CASCADE, WITH [NO] DATA, etc.
    • Fix #306 by supporting CREATE TABLE .. AS ...
    • Fix #305 by supporting more complex join clauses.
    • Fix #303 by supporting MySQL's ON DUPLICATE KEY UPDATE.
    • Fix #301 by adding support for CREATE/DROP/REFRESH on MATERIALIZED VIEW.
    • Add tests to confirm #299 does not affect v2.
    • Fix #297 by adding both SELECT .. INTO .. and SELECT .. BULK COLLECT INTO ...
    • Fix #295 by adding docstrings to all helper functions (and adding an assert to ensure it stays that way as more are added in future).
    • Confirm the whole of the nilenso/honeysql-postgres is implemented out-of-the-box (#293, but see #310 for recent additions not yet incorporated).
    • Fix #292 by adding support for SELECT TOP and OFFSET/FETCH.
    • Fix #284 by adding support for LATERAL (as special syntax, with a helper).
    • Reconcile where behavior with recent 1.0 changes (porting #283 to v2).
    • Fix #280 by adding :escape as special syntax for regular expression patterns.
    • Fix #277 by adding :join-by/join-by so that you can have multiple JOIN's in a specific order.
  • 2.0.0-alpha2 (for early testing)
    • Since Alpha 1, a lot more documentation has been written and docstrings have been added to most functions in honey.sql.helpers.
    • Numerous small improvements have been made to clauses and helpers around insert/upsert.
  • 2.0.0-alpha1 (for early testing)
    • This is a complete rewrite/simplification of HoneySQL that provides just two namespaces:
      • honey.sql -- this is the primary API via the format function as well as the various extension points.
      • honey.sql.helpers -- provides a helper function for every piece of the DSL that is supported out-of-the-box.
    • The coordinates for HoneySQL 2.0 are com.github.seancorfield/honeysql so it can be added to a project that already uses HoneySQL 1.0 without any conflicts, making it easier to migrate piecemeal from 1.0 to 2.0.

HoneySQL pre-2.x Changes

  • 1.0.461 -- 2021-02-22

    • Fix #299 potential SQL injection vulnerability.
    • Fix/Improve merge-where (and merge-having) behavior. #282 via #283 (@camsaul)

  • 1.0.444 -- 2020-05-29

    • Fix #259 so column names are always unqualified in inserts. (@jrdoane)
    • Fix #257 by adding support for cross-join / merge-cross-join / :cross-join. (@dcj)
    • Switch dev/test pipeline to use CLI/deps.edn instead of Leiningen. Also add CI vi both CircleCI and GitHub Actions.
    • Switch to MAJOR.MINOR.COMMITS versioning.
    • Remove macrovich dependency as this is no longer needed with modern ClojureScript.
    • Add mention of next.jdbc everywhere clojure.java.jdbc was mentioned.

  • 0.9.10 -- 2020-03-06

    • Fix #254 #255 by adding support for except. (@ted-coakley-otm)
    • Fix #253 properly by supporting false as well. (@ted-coakley-otm)
    • Add cljs testing to deps.edn, also multi-version clj testing and new readme testing.

  • 0.9.9 -- 2020-03-02

    • Fix #253 by supporting non-sequential join expressions.

  • 0.9.8 -- 2019-09-07

    • Fix #249 by adding honeysql.format/*namespace-as-table?* and :namespace-as-table? option to format. (@seancorfield)

  • 0.9.7 -- 2019-09-07

    • Fix #248 by treating alias as "not a subquery" when generating SQL for it. (@seancorfield)
    • Fix #247 by reverting #132 / #131 so the default behavior is friendlier for namespace-qualified keywords used for table and column names, but adds honeysql.format/*allow-namespaced-names?* to restore the previous behavior. A :allow-namespaced-names? option has been adding to format to set this more easily. (@seancorfield)
    • Fix #235 by adding set0 (:set0) and set1 (:set1) variants of sset (:set) to support different placements of SET (before FROM or after JOIN respectively) that different databases require. See also #200. (@seancorfield)
    • Fix #162 by adding composite/:composite constructor for values. (@seancorfield)
    • Fix #139 by checking arguments to columns/merge-columns and throwing an exception if a single collection is supplied (instead of varargs). (@seancorfield)
    • Fix #128 by adding truncate support. (@seancorfield)
    • Fix #99 by adding a note to the first use of select in the README that column names can be keywords or symbols but not strings. (@seancorfield)

  • 0.9.6 -- 2019-09-24

    • Filter nil conditions out of where/merge-where. Fix #246. (@seancorfield)
    • Fix reflection warning introduced in 0.9.5 (via PR #237).

  • 0.9.5 -- 2019-09-07

    • Support JDK11 (update Midje). PR #238. (@camsaul)
    • Support Turkish user.language. PR #237. (@camsaul)
    • format-predicate now accepts parameterizer as a named argument (default :jdbc) to match format. PR #234. (@glittershark)

  • 0.9.4 -- 2018-10-01

    • #sql/inline nil should produce NULL. Fix #221. (@seancorfield)
    • #sql/inline :kw should produce "kw". Fix #224 via PR #225. (@vincent-dm) Note: this introduces a new protocol, Inlinable, which controls inline value rendering, and changes the behavior of #sql/inline :foo/bar to produce just "bar" (where it was probably invalid SQL before).
    • Alias expressions [:col :alias] are now checked to have exactly two elements. Fix #226. (@seancorfield)
    • Allow where and merge-where to be given no predicates. Fix #228 and PR #230. (@seancorfield, @arichiardi)
    • as alias is no longer split during quoting. Fix #221 and PR #231. (@gws)

Earlier releases

Not all of these releases were tagged on GitHub and none of them have release notes on GitHub. Releases prior to 0.5.0 were not documented (although some were tagged on GitHub).

  • 0.9.3

    • Support parameters in #sql/raw. Fix #219. (@seancorfield)
    • Add examples of table/column aliases to the README. Fix #215. (@seancorfield)
    • Refactor parameterizer to use multimethods. PR #214. (@xlevus)
    • Add examples of raw and inline to the README. Fix #213. (@seancorfield)
    • Add register-parameterizer for custom parameterizers. PR #209. (@juvenn)
    • Change set priority to after join. Fix #200. (@michaelblume)
    • Switch dependency version checker to deps.co. PR #197. (@danielcompton)
    • Support join ... using( ... ). Fix #188, PR #201. (@vincent-dm)
    • Add multi-version testing for Clojure 1.7, 1.8, 1.9, 1.10 (master) (@seancorfield)
    • Bring all dependencies up-to-date. (@seancorfield)
    • Add run-tests.sh to make it easier to run the same tests manually that run on Travis-CI. (@seancorfield)
    • Add deps.edn to support clj/tools.deps.alpha. (@seancorfield)
    • Expose #sql/inline data reader. (@seancorfield)

  • 0.9.2

    • Remove nil :and arguments for where. Fix #203. (@michaelblume)
    • Fix nested select formatting. Fix #198. (@visibletrap)
    • Limit value context to sequences in value positions. (@xiongtx)
    • Avoid wrapping QUERY with parens while formatting INSERT INTO ... QUERY. (@emidln)
    • Allow for custom name-transform-fn. Fix #193. (@madvas)
    • Add :intersect to default-clause-priorities. (@kenfehling)
    • Add :parameterizer :none for skipping next.jdbc or clojure.java.jdbc parameter generation. (@arichiardi)
    • Add ClojureScript self-host support. (@arichiardi)

  • 0.9.1

    • Add helper to inline values/prevent parameterization (@michaelblume)

  • 0.9.0 --

    • BREAKING CHANGE: Some tuples used as values no longer work. See #168.
    • Reprioritize WITH wrt UNION and UNION ALL (@emidln)
    • Helpers for :with and :with-recursive clauses (@enaeher)
    • Ensure sequences act as function invocations when in value position (@joodie)
    • Correct generated arglist for helpers defined with defhelper (@michaelblume)
    • Don't depend on map iteration order, fix bug with multiple map types (@tomconnors)
    • Don't throw away namespace portion of keywords (@jrdoane)
    • Update CLJS dependencies (@michaelblume)
    • Add helpers for :with and :with-recursive clauses (@enaher)

  • 0.8.2

    • Don't parenthesize the subclauses of a UNION, UNION ALL, or INTERSECT clause. (@rnewman)

  • 0.8.1

    • Add priority for union/union-all (@seancorfield)

  • 0.8.0

    • Get arglists right for generated helpers (@camsaul, @michaelblume)
    • Allow HoneySQL to be used from Clojurescript (@rnewman, @michaelblume)
    • BREAKING CHANGE: HoneySQL now requires Clojure 1.7.0 or above.

  • 0.7.0

    • Parameterize numbers, properly handle NaN, Infinity, -Infinity (@akhudek)
    • Fix lock example in README (@michaelblume)
    • Allow joins without a predicate (@stuarth)
    • Escape quotes in quoted identifiers (@csummers)
    • Add support for INTERSECT (@jakemcc)
    • Upgrade Clojure dependency (@michaelblume)

  • 0.6.3

    • Fix bug when SqlCall/SqlRaw object is first argument to another helper (@MichaelBlume)
    • Add support for :intersect clause (@jakemcc)

  • 0.6.2

    • Support column names in :with clauses (@emidln)
    • Support preserving dashes in quoted names (@jrdoane)
    • Document correct use of the :union clause (@dball)
    • Tests for :union and :union-all (@dball)
    • Add fn-handler for CASE statement (@loganlinn)
    • Build/test with Clojure 1.7 (@michaelblume)
    • Refactors for clarity (@michaelblume)

  • 0.6.1

    • Define parameterizable protocol on nil (@dball)

  • 0.6.0

    • Convert seq param values to literal sql param lists (@dball)
    • Apply seq to sets when converting to sql (@dball)

  • 0.5.3

    • Support exists syntax (@cddr)
    • Support locking selects (@dball)
    • Add sql array type and reader literal (@loganmhb)
    • Allow user to specify where in sort order NULLs fall (@mishok13)

  • 0.5.2

    • Add value type to inhibit interpreting clojure sequences as subqueries (@MichaelParam)
    • Improve documentation (@hlship)
    • Add type hints to avoid reflection (@MichaelBlume)
    • Allow database-specific query parameterization (@icambron, @MichaelBlume)

  • 0.5.1

    • Add :url to project.clj (@MichaelBlume)

  • 0.5.0

    • Support basic common table expressions (:with, :with-recursive) (@akhudek)
    • Make clause order extensible (@MichaelBlume)
    • Support extended INSERT INTO...SELECT syntax (@ddellacosta)
    • Update clojure version to 1.6.0 (@MichaelBlume)
    • Implement ToSql on Object, vastly improving performance (@MichaelBlume)
    • Support CAST(foo AS type) (@senior)
    • Support postgres-native parameters (@icambron)
    • Support :full-join (@justindell)
    • Expose :arglist metadata in defhelper (@hlship)
    • Improvements to the documentation, especially showing some recently added features, such as inserts and updates.
Getting Started❯

Can you improve this documentation?Edit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

Keyboard shortcutsReport a problemcljdoc on GitHub
× close