Liking cljdoc? Tell your friends :D

PostgreSQL Support

This section covers the PostgreSQL-specific features that HoneySQL supports out of the box for which you previously needed the nilenso/honeysql-postgres library.

Everything that the nilenso library provided is implemented directly in HoneySQL 2.x although a few things have a slightly different syntax.

Upsert

Upserting data is relatively easy in PostgreSQL because of the ON CONFLICT, ON CONSTRAINT, DO NOTHING, and DO UPDATE SET parts of the INSERT statement.

This usage is supported identically to the nilenso library:

user=> (-> (insert-into :distributors)
           (values [{:did 5 :dname "Gizmo Transglobal"}
                    {:did 6 :dname "Associated Computing, Inc"}])
           (upsert (-> (on-conflict :did)
                       (do-update-set :dname)))
           (returning :*)
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?), (?, ?)
  ON CONFLICT (did) DO UPDATE SET dname = EXCLUDED.dname RETURNING *"
 5 "Gizmo Transglobal" 6 "Associated Computing, Inc"]

However, the nested upsert helper is no longer needed (and there is no corresponding :upsert clause in the DSL):

user=> (-> (insert-into :distributors)
           (values [{:did 5 :dname "Gizmo Transglobal"}
                    {:did 6 :dname "Associated Computing, Inc"}])
           (on-conflict :did)
           (do-update-set :dname)
           (returning :*)
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?), (?, ?)
  ON CONFLICT (did) DO UPDATE SET dname = EXCLUDED.dname RETURNING *"
 5 "Gizmo Transglobal" 6 "Associated Computing, Inc"]

Similarly, the do-nothing helper behaves just the same as in the nilenso library:

user=> (-> (insert-into :distributors)
           (values [{:did 7 :dname "Redline GmbH"}])
           (upsert (-> (on-conflict :did)
                       do-nothing))
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?)
  ON CONFLICT (did) DO NOTHING"
 7 "Redline GmbH"]

As above, the nested upsert helper is no longer needed:

user=> (-> (insert-into :distributors)
           (values [{:did 7 :dname "Redline GmbH"}])
           (on-conflict :did)
           do-nothing
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?)
  ON CONFLICT (did) DO NOTHING"
 7 "Redline GmbH"]

ON CONSTRAINT is handled slightly differently to the nilenso library, with provided a single on-conflict-constraint helper (and clause):

user=> (-> (insert-into :distributors)
           (values [{:did 9 :dname "Antwerp Design"}])
           ;; can specify as a nested clause...
           (on-conflict (on-constraint :distributors_pkey))
           do-nothing
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?)
  ON CONFLICT ON CONSTRAINT distributors_pkey DO NOTHING"
 9 "Antwerp Design"]
user=> (-> (insert-into :distributors)
           (values [{:did 9 :dname "Antwerp Design"}])
           ;; ...or as two separate clauses
           on-conflict
           (on-constraint :distributors_pkey)
           do-nothing
           sql/format)
;; newlines inserted for readability:
["INSERT INTO distributors (did, dname) VALUES (?, ?)
  ON CONFLICT ON CONSTRAINT distributors_pkey DO NOTHING"
 9 "Antwerp Design"]

As above, the upsert helper has been omitted here.

An upsert with where clauses is also possible, with a more compact syntax than the nilenso library used:

user=> (-> (insert-into :user)
           (values [{:phone "5555555" :name "John"}])
           (on-conflict :phone (where [:<> :phone nil]))
           (do-update-set :phone :name (where [:= :user.active false]))
           sql/format)
;; newlines inserted for readability:
["INSERT INTO user (phone, name) VALUES (?, ?)
  ON CONFLICT (phone) WHERE phone IS NOT NULL
  DO UPDATE SET phone = EXCLUDED.phone, name = EXCLUDED.name
  WHERE user.active = FALSE" "5555555" "John"]
;; using the DSL directly:
user=> (sql/format
        {:insert-into    :user
          :values        [{:phone "5555555" :name "John"}]
          :on-conflict   [:phone
                          {:where [:<> :phone nil]}]
          :do-update-set {:fields [:phone :name]
                          :where  [:= :user.active false]}})
;; newlines inserted for readability:
["INSERT INTO user (phone, name) VALUES (?, ?)
  ON CONFLICT (phone) WHERE phone IS NOT NULL
  DO UPDATE SET phone = EXCLUDED.phone, name = EXCLUDED.name
  WHERE user.active = FALSE" "5555555" "John"]

By comparison, this is the DSL structure that nilenso would have required:

  ;; NOT VALID FOR HONEYSQL!
  {:insert-into :user
   :values      [{:phone "5555555" :name "John"}]
   ;; nested under :upsert
   :upsert      {:on-conflict   [:phone]
                 ;; but :where is at the same level as :on-conflict
                 :where         [:<> :phone nil]
                 ;; this is the same as in honeysql:
                 :do-update-set {:fields [:phone :name]
                                 :where  [:= :user.active false]}}}

INSERT INTO AS

Returning

The RETURNING clause is supported identically to the nilenso library:

;; via the DSL:
user=> (sql/format {:delete-from :distributors
                    :where [:> :did 10]
                    :returning [:*]})
["DELETE FROM distributors WHERE did > ? RETURNING *" 10]
;; via the helpers:
user=> (-> (update :distributors)
           (set {:dname "Foo Bar Designs"})
           (where [:= :did 2])
           (returning [:did :dname])
           sql/format)
["UPDATE distributors SET dname = ? WHERE did = ? RETURNING did dname"
 "Foo Bar Designs" 2]

DDL Support

The following DDL statements are all supported by HoneySQL (these are mostly not PostgreSQL-specific but they were not supported by HoneySQL 1.x):

  • CREATE VIEW
  • CREATE TABLE
  • DROP TABLE
  • ALTER TABLE

These are mostly identical to what the nilenso library provides except that sql/call is never needed -- you can use the direct [:func ..] function call syntax instead:

;; create view:
user=> (-> (create-view :metro)
           (select :*)
           (from :cities)
           (where [:= :metroflag "Y"])
           sql/format)
["CREATE VIEW metro AS SELECT * FROM cities WHERE metroflag = ?" "Y"]
;; create table:
user=> (-> (create-table :cities)
           (with-columns [[:city [:varchar 80] [:primary-key]]
                          [:location :point]])
           sql/format)
;; values are inlined:
["CREATE TABLE cities (city VARCHAR(80) PRIMARY KEY, location POINT)"]
;; default values for columns:
user=> (-> (create-table :distributors)
           (with-columns [[:did :integer [:primary-key]
                                         ;; "serial" is inlined as 'SERIAL':
                                         [:default [:nextval "serial"]]]
                          [:name [:varchar 40] [:not nil]]])
           sql/format)
;; newlines inserted for readability:
["CREATE TABLE distributors (
  did INTEGER PRIMARY KEY DEFAULT NEXTVAL('SERIAL'),
  name VARCHAR(40) NOT NULL
)"]
;; PostgreSQL CHECK constraint is supported:
user=> (-> (create-table :products)
           (with-columns [[:product_no :integer]
                          [:name :text]
                          [:price :numeric [:check [:> :price 0]]]
                          [:discounted_price :numeric]
                          [[:check [:and [:> :discounted_price 0] [:> :price :discounted_price]]]]])
           sql/format)
;; newlines inserted for readability:
["CREATE TABLE products (
  product_no INTEGER,
  name TEXT,
  price NUMERIC CHECK(PRICE > 0),
  discounted_price NUMERIC,
  CHECK((discounted_price > 0) AND (price > discounted_price))
)"]
;; conditional creation:
user=> (-> (create-table :products :if-not-exists)
           ...
           sql/format)
["CREATE TABLE IF NOT EXISTS products (...)"]
;; drop table:
user=> (sql/format (drop-table :cities))
["DROP TABLE cities"]
;; drop multiple tables:
user=> (sql/format (drop-table :cities :towns :vilages))
["DROP TABLE cities, towns, vilages"]
;; conditional drop:
user=> (sql/format (drop-table :if-exists :cities :towns :vilages))
["DROP TABLE IF EXISTS cities, towns, vilages"]
;; alter table add column:
user=> (-> (alter-table :fruit)
           (add-column :skin [:varchar 16] nil)
           sql/format)
["ALTER TABLE fruit ADD COLUMN skin VARCHAR(16) NULL"]
;; alter table drop column:
user=> (-> (alter-table :fruit)
           (drop-column :skin)
           sql/format)
["ALTER TABLE fruit DROP COLUMN skin"]
;; alter table modify column:
user=> (-> (alter-table :fruit)
           (modify-column :name [:varchar 64] [:not nil])
           sql/format)
["ALTER TABLE fruit MODIFY COLUMN name VARCHAR(64) NOT NULL"]
;; alter table rename column:
user=> (-> (alter-table :fruit)
           (rename-column :cost :price)
           sql/format)
["ALTER TABLE fruit RENAME COLUMN cost TO price"]
;; rename table:
user=> (-> (alter-table :fruit)
           (rename-table :vegetable)
           sql/format)
["ALTER TABLE fruit RENAME TO vegetable"]

The following PostgreSQL-specific DDL statements are supported (with the same syntax as the nilenso library but sql/format takes slightly different options):

;; create extension:
user=> (-> (create-extension :uuid-ossp)
           (sql/format {:quoted true}))
;; quoting is required for a name containing a hyphen:
["CREATE EXTENSION \"uuid-ossp\""]
;; conditional creation:
user=> (-> (create-extension :uuid-ossp :if-not-exists)
           (sql/format {:quoted true}))
["CREATE EXTENSION IF NOT EXISTS \"uuid-ossp\""]
;; drop extension:
user=> (-> (drop-extension :uuid-ossp)
           (sql/format {:quoted true}))
["DROP EXTENSION \"uuid-ossp\""]
;; drop multiple extensions:
user=> (-> (drop-extension :uuid-ossp :postgis)
           (sql/format {:quoted true}))
["DROP EXTENSION \"uuid-ossp\", \"postgis\""]
;; conditional drop:
user=> (-> (drop-extension :if-exists :uuid-ossp :postgis)
           (sql/format {:quoted true}))
["DROP EXTENSION IF EXISTS \"uuid-ossp\", \"postgis\""]

In addition, HoneySQL supports these DDL statements that were not supported by the nilenso library:

;; alter table add index:
user=> (-> (alter-table :fruit)
           (add-index :unique :fruit-name :name)
           sql/format)
["ALTER TABLE fruit ADD UNIQUE fruit_name(name)"]
;; alter table drop index:
user=> (-> (alter-table :fruit)
           (drop-index :fruit-name)
           sql/format)
["ALTER TABLE fruit DROP INDEX fruit_name"]
;; alter table with multiple clauses:
user=> (sql/format (alter-table :fruit
                                (add-column :skin [:varchar 16] nil)
                                (add-index :unique :fruit-name :name)))
;; newlines inserted for readability:
["ALTER TABLE fruit
    ADD COLUMN skin VARCHAR(16) NULL,
    ADD UNIQUE fruit_name(name)"]

Window / Partition Support

Can you improve this documentation?Edit on GitHub

cljdoc is a website building & hosting documentation for Clojure/Script libraries

× close