javax.sound.midi.Sequencer — clojure-interop/javax.sound 1.0.0

A hardware or software device that plays back a MIDI sequence is known as a sequencer. A MIDI sequence contains lists of time-stamped MIDI data, such as might be read from a standard MIDI file. Most sequencers also provide functions for creating and editing sequences.

The Sequencer interface includes methods for the following basic MIDI sequencer operations:

obtaining a sequence from MIDI file data starting and stopping playback moving to an arbitrary position in the sequence changing the tempo (speed) of playback synchronizing playback to an internal clock or to received MIDI messages controlling the timing of another device

In addition, the following operations are supported, either directly, or indirectly through objects that the Sequencer has access to:

editing the data by adding or deleting individual MIDI events or entire tracks muting or soloing individual tracks in the sequence notifying listener objects about any meta-events or control-change events encountered while playing back the sequence.

add-controller-event-listener clj

(add-controller-event-listener this listener controllers)

Registers a controller event listener to receive notification whenever the sequencer processes a control-change event of the requested type or types. The types are specified by the controllers argument, which should contain an array of MIDI controller numbers. (Each number should be between 0 and 127, inclusive. See the MIDI 1.0 Specification for the numbers that correspond to various types of controllers.)

The returned array contains the MIDI controller numbers for which the listener will now receive events. Some sequencers might not support controller event notification, in which case the array has a length of 0. Other sequencers might support notification for some controllers but not all. This method may be invoked repeatedly. Each time, the returned array indicates all the controllers that the listener will be notified about, not only the controllers requested in that particular invocation.

listener - the controller event listener to add to the list of registered listeners - javax.sound.midi.ControllerEventListener controllers - the MIDI controller numbers for which change notification is requested - int[]

returns: the numbers of all the MIDI controllers whose changes will now be reported to the specified listener - int[]

add-meta-event-listener clj

(add-meta-event-listener this listener)

Registers a meta-event listener to receive notification whenever a meta-event is encountered in the sequence and processed by the sequencer. This method can fail if, for instance,this class of sequencer does not support meta-event notification.

listener - listener to add - javax.sound.midi.MetaEventListener

returns: true if the listener was successfully added, otherwise false - boolean

get-loop-count clj

(get-loop-count this)

Obtains the number of repetitions for playback.

returns: the number of loops after which playback plays to the end of the sequence - int

get-loop-end-point clj

(get-loop-end-point this)

Obtains the end position of the loop, in MIDI ticks.

returns: the end position of the loop, in MIDI ticks (zero-based), or -1 to indicate the end of the sequence - long

get-loop-start-point clj

(get-loop-start-point this)

Obtains the start position of the loop, in MIDI ticks.

returns: the start position of the loop, in MIDI ticks (zero-based) - long

get-master-sync-mode clj

(get-master-sync-mode this)

Obtains the current master synchronization mode for this sequencer.

returns: the current master synchronization mode - javax.sound.midi.Sequencer.SyncMode

get-master-sync-modes clj

(get-master-sync-modes this)

Obtains the set of master synchronization modes supported by this sequencer.

returns: the available master synchronization modes - javax.sound.midi.Sequencer.SyncMode[]

get-microsecond-length clj

(get-microsecond-length this)

Obtains the length of the current sequence, expressed in microseconds, or 0 if no sequence is set.

returns: length of the sequence in microseconds. - long

get-microsecond-position clj

(get-microsecond-position this)

Obtains the current position in the sequence, expressed in microseconds.

returns: the current position in microseconds - long

get-sequence clj

(get-sequence this)

Obtains the sequence on which the Sequencer is currently operating.

This method can be called even if the Sequencer is closed.

returns: the current sequence, or null if no sequence is currently set. - javax.sound.midi.Sequence

get-slave-sync-mode clj

(get-slave-sync-mode this)

Obtains the current slave synchronization mode for this sequencer.

returns: the current slave synchronization mode - javax.sound.midi.Sequencer.SyncMode

get-slave-sync-modes clj

(get-slave-sync-modes this)

Obtains the set of slave synchronization modes supported by the sequencer.

returns: the available slave synchronization modes - javax.sound.midi.Sequencer.SyncMode[]

get-tempo-factor clj

(get-tempo-factor this)

Returns the current tempo factor for the sequencer. The default is 1.0.

returns: tempo factor. - float

get-tempo-in-bpm clj

(get-tempo-in-bpm this)

Obtains the current tempo, expressed in beats per minute. The actual tempo of playback is the product of the returned value and the tempo factor.

returns: the current tempo in beats per minute - float

get-tempo-in-mpq clj

(get-tempo-in-mpq this)

Obtains the current tempo, expressed in microseconds per quarter note. The actual tempo of playback is the product of the returned value and the tempo factor.

returns: the current tempo in microseconds per quarter note - float

get-tick-length clj

(get-tick-length this)

Obtains the length of the current sequence, expressed in MIDI ticks, or 0 if no sequence is set.

returns: length of the sequence in ticks - long

get-tick-position clj

(get-tick-position this)

Obtains the current position in the sequence, expressed in MIDI ticks. (The duration of a tick in seconds is determined both by the tempo and by the timing resolution stored in the Sequence.)

returns: current tick - long

get-track-mute? clj

(get-track-mute? this track)

Obtains the current mute state for a track. The default mute state for all tracks which have not been muted is false. In any case where the specified track has not been muted, this method should return false. This applies if the sequencer does not support muting of tracks, and if the specified track index is not valid.

track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1. - int

returns: true if muted, false if not. - boolean

get-track-solo? clj

(get-track-solo? this track)

Obtains the current solo state for a track. The default mute state for all tracks which have not been solo'd is false. In any case where the specified track has not been solo'd, this method should return false. This applies if the sequencer does not support soloing of tracks, and if the specified track index is not valid.

track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1. - int

returns: true if solo'd, false if not. - boolean

record-disable clj

(record-disable this track)

Disables recording to the specified track. Events will no longer be recorded into this track.

track - the track to disable for recording, or null to disable recording for all tracks. - javax.sound.midi.Track

record-enable clj

(record-enable this track channel)

Prepares the specified track for recording events received on a particular channel. Once enabled, a track will receive events when recording is active.

track - the track to which events will be recorded - javax.sound.midi.Track channel - the channel on which events will be received. If -1 is specified for the channel value, the track will receive data from all channels. - int

throws: java.lang.IllegalArgumentException - thrown if the track is not part of the current sequence.

recording? clj

(recording? this)

Indicates whether the Sequencer is currently recording. The default is false. The Sequencer begins recording when startRecording() is called, and then returns true until stop() or stopRecording() is called.

returns: true if the Sequencer is recording, otherwise false - boolean

remove-controller-event-listener clj

(remove-controller-event-listener this listener controllers)

Removes a controller event listener's interest in one or more types of controller event. The controllers argument is an array of MIDI numbers corresponding to the controllers for which the listener should no longer receive change notifications. To completely remove this listener from the list of registered listeners, pass in null for controllers. The returned array contains the MIDI controller numbers for which the listener will now receive events. The array has a length of 0 if the listener will not receive change notifications for any controllers.

listener - old listener - javax.sound.midi.ControllerEventListener controllers - the MIDI controller numbers for which change notification should be cancelled, or null to cancel for all controllers - int[]

returns: the numbers of all the MIDI controllers whose changes will now be reported to the specified listener - int[]

remove-meta-event-listener clj

(remove-meta-event-listener this listener)

Removes the specified meta-event listener from this sequencer's list of registered listeners, if in fact the listener is registered.

listener - the meta-event listener to remove - javax.sound.midi.MetaEventListener

running? clj

(running? this)

Indicates whether the Sequencer is currently running. The default is false. The Sequencer starts running when either start() or startRecording() is called. isRunning then returns true until playback of the sequence completes or stop() is called.

returns: true if the Sequencer is running, otherwise false - boolean

set-loop-count clj

(set-loop-count this count)

Sets the number of repetitions of the loop for playback. When the playback position reaches the loop end point, it will loop back to the loop start point count times, after which playback will continue to play to the end of the sequence.

If the current position when this method is invoked is greater than the loop end point, playback continues to the end of the sequence without looping, unless the loop end point is changed subsequently.

A count value of 0 disables looping: playback will continue at the loop end point, and it will not loop back to the loop start point. This is a sequencer's default.

If playback is stopped during looping, the current loop status is cleared; subsequent start requests are not affected by an interrupted loop operation.

count - the number of times playback should loop back from the loop's end position to the loop's start position, or LOOP_CONTINUOUSLY to indicate that looping should continue until interrupted - int

throws: java.lang.IllegalArgumentException - if count is negative and not equal to LOOP_CONTINUOUSLY

set-loop-end-point clj

(set-loop-end-point this tick)

Sets the last MIDI tick that will be played in the loop. If the loop count is 0, the loop end point has no effect and playback continues to play when reaching the loop end point.

A value of -1 for the ending point indicates the last tick of the sequence. Otherwise, the ending point must be greater than or equal to the starting point, and it must fall within the size of the loaded sequence.

A sequencer's loop end point defaults to -1, meaning the end of the sequence.

tick - the loop's ending position, in MIDI ticks (zero-based), or -1 to indicate the final tick - long

throws: java.lang.IllegalArgumentException - if the requested loop point cannot be set, usually because it falls outside the sequence's duration or because the ending point is before the starting point

set-loop-start-point clj

(set-loop-start-point this tick)

Sets the first MIDI tick that will be played in the loop. If the loop count is greater than 0, playback will jump to this point when reaching the loop end point.

A value of 0 for the starting point means the beginning of the loaded sequence. The starting point must be lower than or equal to the ending point, and it must fall within the size of the loaded sequence.

A sequencer's loop start point defaults to start of the sequence.

tick - the loop's starting position, in MIDI ticks (zero-based) - long

throws: java.lang.IllegalArgumentException - if the requested loop start point cannot be set, usually because it falls outside the sequence's duration or because the start point is after the end point

set-master-sync-mode clj

(set-master-sync-mode this sync)

Sets the source of timing information used by this sequencer. The sequencer synchronizes to the master, which is the internal clock, MIDI clock, or MIDI time code, depending on the value of sync. The sync argument must be one of the supported modes, as returned by getMasterSyncModes().

sync - the desired master synchronization mode - javax.sound.midi.Sequencer.SyncMode

set-microsecond-position clj

(set-microsecond-position this microseconds)

Sets the current position in the sequence, expressed in microseconds

microseconds - desired position in microseconds - long

set-sequence clj

(set-sequence this sequence)

Sets the current sequence on which the sequencer operates.

This method can be called even if the Sequencer is closed.

sequence - the sequence to be loaded. - javax.sound.midi.Sequence

throws: javax.sound.midi.InvalidMidiDataException - if the sequence contains invalid MIDI data, or is not supported.

set-slave-sync-mode clj

(set-slave-sync-mode this sync)

Sets the slave synchronization mode for the sequencer. This indicates the type of timing information sent by the sequencer to its receiver. The sync argument must be one of the supported modes, as returned by getSlaveSyncModes().

sync - the desired slave synchronization mode - javax.sound.midi.Sequencer.SyncMode

set-tempo-factor clj

(set-tempo-factor this factor)

Scales the sequencer's actual playback tempo by the factor provided. The default is 1.0. A value of 1.0 represents the natural rate (the tempo specified in the sequence), 2.0 means twice as fast, etc. The tempo factor does not affect the values returned by getTempoInMPQ() and getTempoInBPM(). Those values indicate the tempo prior to scaling.

Note that the tempo factor cannot be adjusted when external synchronization is used. In that situation, setTempoFactor always sets the tempo factor to 1.0.

factor - the requested tempo scalar - float

set-tempo-in-bpm clj

(set-tempo-in-bpm this bpm)

Sets the tempo in beats per minute. The actual tempo of playback is the product of the specified value and the tempo factor.

bpm - desired new tempo in beats per minute - float

set-tempo-in-mpq clj

(set-tempo-in-mpq this mpq)

Sets the tempo in microseconds per quarter note. The actual tempo of playback is the product of the specified value and the tempo factor.

mpq - desired new tempo in microseconds per quarter note. - float

set-tick-position clj

(set-tick-position this tick)

Sets the current sequencer position in MIDI ticks

tick - the desired tick position - long

set-track-mute clj

(set-track-mute this track mute)

Sets the mute state for a track. This method may fail for a number of reasons. For example, the track number specified may not be valid for the current sequence, or the sequencer may not support this functionality. An application which needs to verify whether this operation succeeded should follow this call with a call to getTrackMute(int).

track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1. - int mute - the new mute state for the track. true implies the track should be muted, false implies the track should be unmuted. - boolean

set-track-solo clj

(set-track-solo this track solo)

Sets the solo state for a track. If solo is true only this track and other solo'd tracks will sound. If solo is false then only other solo'd tracks will sound, unless no tracks are solo'd in which case all un-muted tracks will sound.

This method may fail for a number of reasons. For example, the track number specified may not be valid for the current sequence, or the sequencer may not support this functionality. An application which needs to verify whether this operation succeeded should follow this call with a call to getTrackSolo(int).

track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1. - int solo - the new solo state for the track. true implies the track should be solo'd, false implies the track should not be solo'd. - boolean

start clj

(start this)

Starts playback of the MIDI data in the currently loaded sequence. Playback will begin from the current position. If the playback position reaches the loop end point, and the loop count is greater than 0, playback will resume at the loop start point for the number of repetitions set with setLoopCount. After that, or if the loop count is 0, playback will continue to play to the end of the sequence.

The implementation ensures that the synthesizer is brought to a consistent state when jumping to the loop start point by sending appropriate controllers, pitch bend, and program change events.

throws: java.lang.IllegalStateException - if the Sequencer is closed.

start-recording clj

(start-recording this)

Starts recording and playback of MIDI data. Data is recorded to all enabled tracks, on the channel(s) for which they were enabled. Recording begins at the current position of the sequencer. Any events already in the track are overwritten for the duration of the recording session. Events from the currently loaded sequence, if any, are delivered to the sequencer's transmitter(s) along with messages received during recording.

Note that tracks are not by default enabled for recording. In order to record MIDI data, at least one track must be specifically enabled for recording.

throws: java.lang.IllegalStateException - if the Sequencer is closed.

stop clj

(stop this)

Stops recording, if active, and playback of the currently loaded sequence, if any.

throws: java.lang.IllegalStateException - if the Sequencer is closed.

stop-recording clj

(stop-recording this)

Stops recording, if active. Playback of the current sequence continues.

throws: java.lang.IllegalStateException - if the Sequencer is closed.