javax.imageio.stream.ImageOutputStream
A seekable output stream interface for use by ImageWriters. Various output destinations, such as OutputStreams and Files, as well as future fast I/O destinations may be "wrapped" by a suitable implementation of this interface for use by the Image I/O API.
Unlike a standard OutputStream, ImageOutputStream extends its counterpart, ImageInputStream. Thus it is possible to read from the stream as it is being written. The same seek and flush positions apply to both reading and writing, although the semantics for dealing with a non-zero bit offset before a byte-aligned write are necessarily different from the semantics for dealing with a non-zero bit offset before a byte-aligned read. When reading bytes, any bit offset is set to 0 before the read; when writing bytes, a non-zero bit offset causes the remaining bits in the byte to be written as 0s. The byte-aligned write then starts at the next byte position.
A seekable output stream interface for use by ImageWriters. Various output destinations, such as OutputStreams and Files, as well as future fast I/O destinations may be "wrapped" by a suitable implementation of this interface for use by the Image I/O API. Unlike a standard OutputStream, ImageOutputStream extends its counterpart, ImageInputStream. Thus it is possible to read from the stream as it is being written. The same seek and flush positions apply to both reading and writing, although the semantics for dealing with a non-zero bit offset before a byte-aligned write are necessarily different from the semantics for dealing with a non-zero bit offset before a byte-aligned read. When reading bytes, any bit offset is set to 0 before the read; when writing bytes, a non-zero bit offset causes the remaining bits in the byte to be written as 0s. The byte-aligned write then starts at the next byte position.
flush-beforeclj
(flush-before this pos)Flushes all data prior to the given position to the underlying destination, such as an OutputStream or File. Attempting to seek to the flushed portion of the stream will result in an IndexOutOfBoundsException.
pos - a long containing the length of the stream prefix that may be flushed to the destination. - long
throws: java.lang.IndexOutOfBoundsException - if pos lies in the flushed portion of the stream or past the current stream position.
Flushes all data prior to the given position to the underlying destination, such as an OutputStream or File. Attempting to seek to the flushed portion of the stream will result in an IndexOutOfBoundsException. pos - a long containing the length of the stream prefix that may be flushed to the destination. - `long` throws: java.lang.IndexOutOfBoundsException - if pos lies in the flushed portion of the stream or past the current stream position.
writeclj
(write this b)(write this b off len)Writes a sequence of bytes to the stream at the current position. If len is 0, nothing is written. The byte b[off] is written first, then the byte b[off 1], and so on.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the flushBits method of ImageOutputStreamImpl to guarantee this.
b - an array of bytes to be written. - byte[]
off - the start offset in the data. - int
len - the number of bytes to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than b.length.
Writes a sequence of bytes to the stream at the current position. If len is 0, nothing is written. The byte b[off] is written first, then the byte b[off 1], and so on. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the flushBits method of ImageOutputStreamImpl to guarantee this. b - an array of bytes to be written. - `byte[]` off - the start offset in the data. - `int` len - the number of bytes to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than b.length.
write-bitclj
(write-bit this bit)Writes a single bit, given by the least significant bit of the argument, to the stream at the current bit offset within the current byte position. The upper 31 bits of the argument are ignored. The given bit replaces the previous bit at that position. The bit offset is advanced by one and reduced modulo 8.
If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically.
bit - an int whose least significant bit is to be written to the stream. - int
throws: java.io.IOException - if an I/O error occurs.
Writes a single bit, given by the least significant bit of the argument, to the stream at the current bit offset within the current byte position. The upper 31 bits of the argument are ignored. The given bit replaces the previous bit at that position. The bit offset is advanced by one and reduced modulo 8. If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically. bit - an int whose least significant bit is to be written to the stream. - `int` throws: java.io.IOException - if an I/O error occurs.
write-bitsclj
(write-bits this bits num-bits)Writes a sequence of bits, given by the numBits least significant bits of the bits argument in left-to-right order, to the stream at the current bit offset within the current byte position. The upper 64 - numBits bits of the argument are ignored. The bit offset is advanced by numBits and reduced modulo 8. Note that a bit offset of 0 always indicates the most-significant bit of the byte, and bytes of bits are written out in sequence as they are encountered. Thus bit writes are always effectively in network byte order. The actual stream byte order setting is ignored.
Bit data may be accumulated in memory indefinitely, until flushBefore is called. At that time, all bit data prior to the flushed position will be written.
If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically.
bits - a long containing the bits to be written, starting with the bit in position numBits - 1 down to the least significant bit. - long
num-bits - an int between 0 and 64, inclusive. - int
throws: java.lang.IllegalArgumentException - if numBits is not between 0 and 64, inclusive.
Writes a sequence of bits, given by the numBits least significant bits of the bits argument in left-to-right order, to the stream at the current bit offset within the current byte position. The upper 64 - numBits bits of the argument are ignored. The bit offset is advanced by numBits and reduced modulo 8. Note that a bit offset of 0 always indicates the most-significant bit of the byte, and bytes of bits are written out in sequence as they are encountered. Thus bit writes are always effectively in network byte order. The actual stream byte order setting is ignored. Bit data may be accumulated in memory indefinitely, until flushBefore is called. At that time, all bit data prior to the flushed position will be written. If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically. bits - a long containing the bits to be written, starting with the bit in position numBits - 1 down to the least significant bit. - `long` num-bits - an int between 0 and 64, inclusive. - `int` throws: java.lang.IllegalArgumentException - if numBits is not between 0 and 64, inclusive.
write-booleanclj
(write-boolean this v)Writes a boolean value to the stream. If v is true, the value (byte)1 is written; if v is false, the value (byte)0 is written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - the boolean to be written. - boolean
throws: java.io.IOException - if an I/O error occurs.
Writes a boolean value to the stream. If v is true, the value (byte)1 is written; if v is false, the value (byte)0 is written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - the boolean to be written. - `boolean` throws: java.io.IOException - if an I/O error occurs.
write-byteclj
(write-byte this v)Writes the 8 low-order bits of v to the stream. The 24 high-order bits of v are ignored. (This means that writeByte does exactly the same thing as write for an integer argument.)
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - an int containing the byte value to be written. - int
throws: java.io.IOException - if an I/O error occurs.
Writes the 8 low-order bits of v to the stream. The 24 high-order bits of v are ignored. (This means that writeByte does exactly the same thing as write for an integer argument.) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - an int containing the byte value to be written. - `int` throws: java.io.IOException - if an I/O error occurs.
write-bytesclj
(write-bytes this s)Writes a string to the output stream. For every character in the string s, taken in order, one byte is written to the output stream. If s is null, a NullPointerException is thrown.
If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. For each character, one byte is written, the low-order byte, in exactly the manner of the writeByte method. The high-order eight bits of each character in the string are ignored.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
s - a String containing the value to be written. - java.lang.String
throws: java.lang.NullPointerException - if s is null.
Writes a string to the output stream. For every character in the string s, taken in order, one byte is written to the output stream. If s is null, a NullPointerException is thrown. If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. For each character, one byte is written, the low-order byte, in exactly the manner of the writeByte method. The high-order eight bits of each character in the string are ignored. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. s - a String containing the value to be written. - `java.lang.String` throws: java.lang.NullPointerException - if s is null.
write-charclj
(write-char this v)This method is a synonym for writeShort.
v - an int containing the char (unsigned short) value to be written. - int
throws: java.io.IOException - if an I/O error occurs.
This method is a synonym for writeShort. v - an int containing the char (unsigned short) value to be written. - `int` throws: java.io.IOException - if an I/O error occurs.
write-charsclj
(write-chars this s)(write-chars this c off len)Writes a sequence of chars to the stream at the current position. If len is 0, nothing is written. The char c[off] is written first, then the char c[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
c - an array of chars to be written. - char[]
off - the start offset in the data. - int
len - the number of chars to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than c.length.
Writes a sequence of chars to the stream at the current position. If len is 0, nothing is written. The char c[off] is written first, then the char c[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. c - an array of chars to be written. - `char[]` off - the start offset in the data. - `int` len - the number of chars to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than c.length.
write-doubleclj
(write-double this v)Writes a double value, which is comprised of four bytes, to the output stream. It does this as if it first converts this double value to an long in exactly the manner of the Double.doubleToLongBits method and then writes the long value in exactly the manner of the writeLong method.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - a double containing the value to be written. - double
throws: java.io.IOException - if an I/O error occurs.
Writes a double value, which is comprised of four bytes, to the output stream. It does this as if it first converts this double value to an long in exactly the manner of the Double.doubleToLongBits method and then writes the long value in exactly the manner of the writeLong method. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - a double containing the value to be written. - `double` throws: java.io.IOException - if an I/O error occurs.
write-doublesclj
(write-doubles this d off len)Writes a sequence of doubles to the stream at the current position. If len is 0, nothing is written. The double d[off] is written first, then the double d[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
d - an array of doubless to be written. - double[]
off - the start offset in the data. - int
len - the number of doubles to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than d.length.
Writes a sequence of doubles to the stream at the current position. If len is 0, nothing is written. The double d[off] is written first, then the double d[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. d - an array of doubless to be written. - `double[]` off - the start offset in the data. - `int` len - the number of doubles to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than d.length.
write-floatclj
(write-float this v)Writes a float value, which is comprised of four bytes, to the output stream. It does this as if it first converts this float value to an int in exactly the manner of the Float.floatToIntBits method and then writes the int value in exactly the manner of the writeInt method.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - a float containing the value to be written. - float
throws: java.io.IOException - if an I/O error occurs.
Writes a float value, which is comprised of four bytes, to the output stream. It does this as if it first converts this float value to an int in exactly the manner of the Float.floatToIntBits method and then writes the int value in exactly the manner of the writeInt method. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - a float containing the value to be written. - `float` throws: java.io.IOException - if an I/O error occurs.
write-floatsclj
(write-floats this f off len)Writes a sequence of floats to the stream at the current position. If len is 0, nothing is written. The float f[off] is written first, then the float f[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
f - an array of floats to be written. - float[]
off - the start offset in the data. - int
len - the number of floats to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than f.length.
Writes a sequence of floats to the stream at the current position. If len is 0, nothing is written. The float f[off] is written first, then the float f[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. f - an array of floats to be written. - `float[]` off - the start offset in the data. - `int` len - the number of floats to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than f.length.
write-intclj
(write-int this v)Writes the 32 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be:
(byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff)
Otheriwse, the bytes written will be:
(byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff)
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - an int containing the value to be written. - int
throws: java.io.IOException - if an I/O error occurs.
Writes the 32 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otheriwse, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - an int containing the value to be written. - `int` throws: java.io.IOException - if an I/O error occurs.
write-intsclj
(write-ints this i off len)Writes a sequence of ints to the stream at the current position. If len is 0, nothing is written. The int i[off] is written first, then the int i[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
i - an array of ints to be written. - int[]
off - the start offset in the data. - int
len - the number of ints to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than i.length.
Writes a sequence of ints to the stream at the current position. If len is 0, nothing is written. The int i[off] is written first, then the int i[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. i - an array of ints to be written. - `int[]` off - the start offset in the data. - `int` len - the number of ints to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than i.length.
write-longclj
(write-long this v)Writes the 64 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be:
(byte)((v >> 56) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff)
Otherwise, the bytes written will be:
(byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 56) & 0xff)
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - a long containing the value to be written. - long
throws: java.io.IOException - if an I/O error occurs.
Writes the 64 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 56) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otherwise, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 56) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - a long containing the value to be written. - `long` throws: java.io.IOException - if an I/O error occurs.
write-longsclj
(write-longs this l off len)Writes a sequence of longs to the stream at the current position. If len is 0, nothing is written. The long l[off] is written first, then the long l[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
l - an array of longs to be written. - long[]
off - the start offset in the data. - int
len - the number of longs to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than l.length.
Writes a sequence of longs to the stream at the current position. If len is 0, nothing is written. The long l[off] is written first, then the long l[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. l - an array of longs to be written. - `long[]` off - the start offset in the data. - `int` len - the number of longs to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than l.length.
write-shortclj
(write-short this v)Writes the 16 low-order bits of v to the stream. The 16 high-order bits of v are ignored. If the stream uses network byte order, the bytes written, in order, will be:
(byte)((v >> 8) & 0xff) (byte)(v & 0xff)
Otherwise, the bytes written will be:
(byte)(v & 0xff) (byte)((v >> 8) & 0xff)
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
v - an int containing the short value to be written. - int
throws: java.io.IOException - if an I/O error occurs.
Writes the 16 low-order bits of v to the stream. The 16 high-order bits of v are ignored. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otherwise, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. v - an int containing the short value to be written. - `int` throws: java.io.IOException - if an I/O error occurs.
write-shortsclj
(write-shorts this s off len)Writes a sequence of shorts to the stream at the current position. If len is 0, nothing is written. The short s[off] is written first, then the short s[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
s - an array of shorts to be written. - short[]
off - the start offset in the data. - int
len - the number of shorts to write. - int
throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than s.length.
Writes a sequence of shorts to the stream at the current position. If len is 0, nothing is written. The short s[off] is written first, then the short s[off 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. s - an array of shorts to be written. - `short[]` off - the start offset in the data. - `int` len - the number of shorts to write. - `int` throws: java.lang.IndexOutOfBoundsException - if off is negative, len is negative, or off len is greater than s.length.
write-utfclj
(write-utf this s)Writes two bytes of length information to the output stream in network byte order, followed by the modified UTF-8 representation of every character in the string s. If s is null, a NullPointerException is thrown. Each character in the string s is converted to a group of one, two, or three bytes, depending on the value of the character.
If a character c is in the range \u0001 through \u007f, it is represented by one byte:
(byte)c
If a character c is \u0000 or is in the range \u0080 through \u07ff, then it is represented by two bytes, to be written in the order shown:
(byte)(0xc0 | (0x1f & (c >> 6))) (byte)(0x80 | (0x3f & c))
If a character c is in the range \u0800 through uffff, then it is represented by three bytes, to be written in the order shown:
(byte)(0xe0 | (0x0f & (c >> 12))) (byte)(0x80 | (0x3f & (c >> 6))) (byte)(0x80 | (0x3f & c))
First, the total number of bytes needed to represent all the characters of s is calculated. If this number is larger than 65535, then a UTFDataFormatException is thrown. Otherwise, this length is written to the output stream in exactly the manner of the writeShort method; after this, the one-, two-, or three-byte representation of each character in the string s is written.
The current byte order setting is ignored.
If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
Note: This method should not be used in the implementation of image formats that use standard UTF-8, because the modified UTF-8 used here is incompatible with standard UTF-8.
s - a String containing the value to be written. - java.lang.String
throws: java.lang.NullPointerException - if s is null.
Writes two bytes of length information to the output stream in network byte order, followed by the modified UTF-8 representation of every character in the string s. If s is null, a NullPointerException is thrown. Each character in the string s is converted to a group of one, two, or three bytes, depending on the value of the character. If a character c is in the range \u0001 through \u007f, it is represented by one byte: (byte)c If a character c is \u0000 or is in the range \u0080 through \u07ff, then it is represented by two bytes, to be written in the order shown: (byte)(0xc0 | (0x1f & (c >> 6))) (byte)(0x80 | (0x3f & c)) If a character c is in the range \u0800 through uffff, then it is represented by three bytes, to be written in the order shown: (byte)(0xe0 | (0x0f & (c >> 12))) (byte)(0x80 | (0x3f & (c >> 6))) (byte)(0x80 | (0x3f & c)) First, the total number of bytes needed to represent all the characters of s is calculated. If this number is larger than 65535, then a UTFDataFormatException is thrown. Otherwise, this length is written to the output stream in exactly the manner of the writeShort method; after this, the one-, two-, or three-byte representation of each character in the string s is written. The current byte order setting is ignored. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Note: This method should not be used in the implementation of image formats that use standard UTF-8, because the modified UTF-8 used here is incompatible with standard UTF-8. s - a String containing the value to be written. - `java.lang.String` throws: java.lang.NullPointerException - if s is null.
cljdoc is a website building & hosting documentation for Clojure/Script libraries
× close